icoFsiNonLinULSolidFoam with mesh topology change ( DynamicTopoFvMesh class)

rasool_soofi · November 12, 2015, 15:28

hello foamers

I am using icoFsiNonLinULSolidFoam solver for simulating the one way valve.

Because of extreme change of valve's throat area , DynamicMotionFvMesh class is not a good scheme for my case. I want to know that , can this solver support other dynamic scheme defining in foam-extend-3.1 ( for example dynamicTopoFvMesh or dynamicRefineFvMesh , etc) for re-meshing or refining the regions that have bad meshes during solution .

Could you help me to solve this problem

Best Regards

Bartosz Żłobiński · April 18, 2016, 10:58

Hello,

As far as I know, meshing is completely independant from solver, so other classes should work also with icoFsiNonLinULSolidFoam. I'm working on similar topic. Maybe I could say more soon.

Best regards,
Bartosz Żłobiński

November 12, 2015, 15:28	icoFsiNonLinULSolidFoam with mesh topology change ( DynamicTopoFvMesh class)	#1
rasool_soofi New Member rasoul Join Date: Mar 2015 Posts: 24 Rep Power: 11	hello foamers I am using icoFsiNonLinULSolidFoam solver for simulating the one way valve. Because of extreme change of valve's throat area , DynamicMotionFvMesh class is not a good scheme for my case. I want to know that , can this solver support other dynamic scheme defining in foam-extend-3.1 ( for example dynamicTopoFvMesh or dynamicRefineFvMesh , etc) for re-meshing or refining the regions that have bad meshes during solution . Could you help me to solve this problem Best Regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
decomposePar problem: Cell 0contains face labels out of range	vaina74	OpenFOAM Pre-Processing	37	July 20, 2020 05:38
The udf.h headers are unable to open- in VISUAL STUDIO 13	sanjeetlimbu	Fluent UDF and Scheme Programming	4	May 2, 2016 05:38
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 06:20
Mesh motion with Translation & Rotation	Doginal	CFX	2	January 12, 2014 06:21
Help with UDF to change mesh by external mesh generator	zou_mo	Fluent UDF and Scheme Programming	1	July 1, 2009 04:57

April 18, 2016, 10:58		#2
Bartosz Żłobiński New Member Bartosz Żłobiński Join Date: Oct 2015 Location: Warsaw Posts: 11 Rep Power: 10	Hello, As far as I know, meshing is completely independant from solver, so other classes should work also with icoFsiNonLinULSolidFoam. I'm working on similar topic. Maybe I could say more soon. Best regards, Bartosz Żłobiński