|
[Sponsors] |
November 28, 2015, 10:22 |
Temperature increases suddenly
|
#1 |
New Member
Mr.liu
Join Date: Sep 2012
Posts: 27
Rep Power: 14 |
Hi
I am a new foamer, and these days i am studying reactingFoam. I turn off the chemistry and combustion in these two properties, run a cold case (swirl combustion), just one inlet, coflow and outlet. I meet the problem like this: diagonal: Solving for rho, Initial residual = 0, Final residual = 0, No Iterations 0 PIMPLE: iteration 1 DILUPBiCG: Solving for O2, Initial residual = 0.830952, Final residual = 2.2885e-07, No Iterations 32 DILUPBiCG: Solving for H2O, Initial residual = 0, Final residual = 0, No Iterations 0 DILUPBiCG: Solving for CH4, Initial residual = 1.05216e-80, Final residual = 1.05216e-80, No Iterations 0 DILUPBiCG: Solving for CO2, Initial residual = 0, Final residual = 0, No Iterations 0 DILUPBiCG: Solving for h, Initial residual = 0.870332, Final residual = 5.56243e-07, No Iterations 31 min/max(T) = 200, 5000 DICPCG: Solving for p, Initial residual = 0.0160394, Final residual = 6.018e-19, No Iterations 1 diagonal: Solving for rho, Initial residual = 0, Final residual = 0, No Iterations 0 time step continuity errors : sum local = 1.34074e-06, global = -1.56373e-07, cumulative = -0.000144214 DICPCG: Solving for p, Initial residual = 2.51355e-07, Final residual = 2.51355e-07, No Iterations 0 diagonal: Solving for rho, Initial residual = 0, Final residual = 0, No Iterations 0 time step continuity errors : sum local = 1.42259e-06, global = -1.56104e-07, cumulative = -0.00014437 DILUPBiCG: Solving for epsilon, Initial residual = 0.997237, Final residual = 6.1094, No Iterations 1001 bounding epsilon, min: -2.11486e+71 max: 2.69686e+71 average: -5.5868e+65 DILUPBiCG: Solving for k, Initial residual = 0.868327, Final residual = 9.14489e-07, No Iterations 28 bounding k, min: -7.22251e+44 max: 3.27511e+44 average: -2.04433e+40 ExecutionTime = 9902.84 s ClockTime = 12857 s Can anyone help me? i do not know whether it is the problems of my set boundary or Mesh? |
|
June 8, 2017, 06:13 |
|
#2 |
Senior Member
Lasse Brams Vinther
Join Date: Oct 2015
Posts: 118
Rep Power: 11 |
Hello Mr. Liu,
I believe this issue corresponds to an already reported issue in post: having trouble using reactingFoam with reactions turned off If you don't think this is this same issue please attach your case or more general information regarding flow (such as laminar or turbulent?), courant number and such. |
|
Tags |
reactingfoam, swirl combustion |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Shadow Wall and temperature | norger | FLUENT | 10 | September 28, 2019 12:43 |
UDF for Back-flow Temperature | G340 | Fluent UDF and Scheme Programming | 3 | August 21, 2013 05:56 |
Inlet won't apply UDF and has temperature at 0K! | tccruise | Fluent UDF and Scheme Programming | 2 | September 14, 2012 07:08 |
where is the calculation of the temperature field | Tobi | OpenFOAM | 1 | July 30, 2012 11:40 |
Too low temperature at combustor outlet | romekr | FLUENT | 2 | February 6, 2012 11:02 |