|
[Sponsors] |
setting slamDampCoeff in the transportproperties |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 27, 2016, 06:25 |
setting slamDampCoeff in the transportproperties
|
#1 |
Member
Thomas Flint
Join Date: Jan 2016
Posts: 60
Rep Power: 10 |
Hi,
Just a quick question, I need to modify the slamDampCoeff in multiphaseeulerfoam but at the moment I'm just changing the value in the createfields.h file and running my case. The value is set with: scalar slamDampCoeff ( fluid.lookupOrDefault<scalar>("slamDampCoeff", 1) ); so I think I should be able to set it in the transportproperties somehow but whenever I try it doesnt seem to change anything. Does anyone know how to do this? Best regards, Tom |
|
July 14, 2016, 04:42 |
|
#2 |
New Member
Vitor Geraldes
Join Date: Dec 2009
Location: Lisbon, Portugal
Posts: 26
Rep Power: 16 |
This parameter is used to facilitate the numerical convergence. So, in the end it should have no impact on the numerical solution.
|
|
Tags |
maxslamvelocity, multiphaseeulerfoam, openfoam 3.0, slamdampcoeff, velocity |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
using chemkin | JMDag2004 | OpenFOAM Pre-Processing | 2 | March 8, 2016 23:38 |
[snappyHexMesh] determining displacement for added points | CFDnewbie147 | OpenFOAM Meshing & Mesh Conversion | 1 | October 22, 2013 10:53 |
Residual level setting of Fluent | lhlh | ANSYS | 2 | November 17, 2012 22:35 |
Cells with t below lower limit | Purushothama | Siemens | 2 | May 31, 2010 22:58 |
Warning 097- | AB | Siemens | 6 | November 15, 2004 05:41 |