 |
 |
 |
|
|
|
[Sponsors] | ||||
December 5, 2016, 09:55
|
Elbow Tutorial Different fluids
|
#1 |
|
New Member
Peter Lustig
Join Date: Dec 2016
Posts: 3
Rep Power: 10  |
Hi,
I asked myself if its possible with OpenFOAM to define that through one inlet is flowing Liquid 1 and through the other Liquid 2 and trace their flow. With this background I took a look at the elbow tutorial at icoFoam. Would it be easy to define what I have in mind or is it quite complex? I don't want two Phases, the fluids should be mixing. Thanks |
|
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Vessel tutorial problem | hosseinhgf | CFX | 1 | March 17, 2013 11:39 |
| [DesignModeler] Parametric elbow pipe | thaenan | ANSYS Meshing & Geometry | 0 | May 18, 2012 16:26 |
| [ICEM] Question about Shrink Wrap tutorial | zhaohui | ANSYS Meshing & Geometry | 0 | November 23, 2011 21:48 |
| CFD-ACE Tutorial for Serpentine Fuel cell Channel | Taqi | Main CFD Forum | 0 | April 13, 2008 13:12 |
| Rotor/stator tutorial, and how to... | gilberto | CFX | 5 | January 21, 2002 09:41 |
Linear Mode
