Initializing the flame for 1D premixed flame test case

R.Mah · January 11, 2017, 07:40

Hi all

I have FGM tables generated based on the code FlameMaster and then with a solver based on reactingFoam , I want to simulate the Sandia flame D.
But before I should verify if solver is accessing the tables correctly or not.
For that I need to do a 1D flame case and then compare the results with the values of the table.
the procedure is : using quasi one dimensional domain (grid lenght 40 mm) where the sides of the domain are assigned with symmetry boundary conditions, the flame should be initialized at 20mm.
Could anyone told me how to initialize the flame ?
and does any one tried to do such verification case (verify if the combustion solver is accessing correcly the tables in the case of using tabulated chemistry strategy)

Many thanks

R.Mah · January 11, 2017, 08:44

any one can help me on this ?

January 11, 2017, 07:40	Initializing the flame for 1D premixed flame test case	#1
R.Mah New Member Bah.Mah Join Date: Jun 2016 Posts: 18 Rep Power: 9	Hi all I have FGM tables generated based on the code FlameMaster and then with a solver based on reactingFoam , I want to simulate the Sandia flame D. But before I should verify if solver is accessing the tables correctly or not. For that I need to do a 1D flame case and then compare the results with the values of the table. the procedure is : using quasi one dimensional domain (grid lenght 40 mm) where the sides of the domain are assigned with symmetry boundary conditions, the flame should be initialized at 20mm. Could anyone told me how to initialize the flame ? and does any one tried to do such verification case (verify if the combustion solver is accessing correcly the tables in the case of using tabulated chemistry strategy) Many thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Difficulties with premixed laminar methane flame in openFoam	DustExplosion	OpenFOAM	16	August 9, 2019 05:31
Burning Velocity Model (BVM) to simulate pure premixed turbulent flame	saad.akhtar312	CFX	0	February 22, 2015 20:28
Zeta-f turbulence model test case	MasAmi	OpenFOAM Running, Solving & CFD	1	March 3, 2014 18:31
Error when run test case turb_ONERAM	mistuning	SU2	1	October 3, 2013 01:17
diffustion flame case set up	Edison_Ge	OpenFOAM Running, Solving & CFD	0	August 27, 2010 03:08

January 11, 2017, 08:44		#2
R.Mah New Member Bah.Mah Join Date: Jun 2016 Posts: 18 Rep Power: 9	any one can help me on this ?