|
[Sponsors] |
February 13, 2017, 08:54 |
2D airfoil too high drag coefficient
|
#1 |
Member
bye bye my blue
Join Date: Sep 2016
Posts: 37
Rep Power: 8 |
'm simulating 2D airfoil..
Governing eqn is kEpsilon y+ min : 6.96 max = 30.79859 average = 15.6028 and mesh is generated by salome (viscous layer =0.03 and distance:0.0006) at (http://www.pointwise.com/yplus/), i used 0.0006 xfoil naca0015 Cd = 0.00579 and mine is 0.048 I don't know what is the problem.. here are mesh picture and 0,system,postprocess folders Thanks |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
wrong SU2 calculation for lift and drag coefficient for NAC4421 | mechy | SU2 | 7 | January 9, 2017 05:18 |
Drag force coefficient too high for a flow past a cylinder using komega sst | Scabbard | OpenFOAM Running, Solving & CFD | 37 | March 21, 2016 16:16 |
Negative Pressure Drag Coefficient of main airfoil in Multi-Element rear wing | Masoud.A1 | FLUENT | 4 | April 8, 2015 23:17 |
Floworks and airfoil drag coefficient | ap79 | FloEFD, FloWorks & FloTHERM | 4 | November 14, 2014 09:45 |
Calculation of Drag Coefficient, Help Please | teek22 | CFX | 1 | April 26, 2012 18:41 |