CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (https://www.cfd-online.com/Forums/openfoam-solving/)
-   -   High temperature of parcels in coalChemistryFoam (https://www.cfd-online.com/Forums/openfoam-solving/185910-high-temperature-parcels-coalchemistryfoam.html)

amin_jalalian April 5, 2017 10:33

High temperature of parcels in coalChemistryFoam
 
1 Attachment(s)
Hi Foamers,

I have high max temperature for coal parcels around 5000 K, and solver write "Maximum number of iterations exceeded" and stop.
I changed maximum time step from 2.5e-5 to 4e-6 but not be correct.
I changed h solver from PBiCG to smoothSolver but not be correct.
I changed for T of parcel from Euler to analytical but the error is yet.
I attached the results picture.

What can I do?

pyroWinter June 5, 2017 10:49

What are your boundary conditions? Depending on the case, sometimes those errors arise when the mass balance is incorrect (check the sum of the mass fractions in the boundary conditions, as well as any other physical incoherence that may be present). The time step may be related as well.


All times are GMT -4. The time now is 04:45.