CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Running, Solving & CFD

Two-way coupling issues

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 15, 2017, 04:05
Default Two-way coupling issues
  #1
Member
 
vidyadhar
Join Date: Jul 2016
Posts: 68
Rep Power: 3
vidyadhar is on a distinguished road
Hello All,

I am using a volume of fluid solver coupled with Lagrangian Particle Tracking (vofLPTSolver).

For the given mesh, when I am simulating with one-way coupling: simulation is successful.

But, for the same mesh and same all other conditions, when I try to simulate with two-way coupling: simulation is ending as soon as particles are injected. From the log file: Time step is drastically decreasing to very low value as soon as particles are injected and simulation is stopping.

I did not face this issue when I used the same solver with one-way coupling.

May I know how to rectify this issue? Please find attached bubbleCloudProperties file

Thanks in advance,
vidyadhar
Attached Files
File Type: gz bubbleCloudProperties.tar.gz (1.5 KB, 2 views)
vidyadhar is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Difference between stagger/coupling iteration and coupling step Jiricbeng CFX 1 September 13, 2016 02:37
Coupling time duration, Coupling time steps Jiricbeng CFX 0 April 29, 2015 08:37
FSI problem with system coupling: Fail to couple FLUENT sophieUNSW FLUENT 2 May 1, 2014 20:30
one/two way coupling of DPM Angela FLUENT 3 April 28, 2008 09:29
Issues with coupling Jared Siemens 2 June 8, 2006 10:47


All times are GMT -4. The time now is 16:43.