CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

Multiphase problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 25, 2017, 04:54
Question Multiphase problem
  #1
New Member
 
Julien P
Join Date: Jan 2017
Location: France
Posts: 3
Rep Power: 9
Ptiji is on a distinguished road
Hi foamers,

I need anybody to help me on multiphase problem. Until now, I solve just turbulent flow.

Now I do not know what solver would I use?

My problem is a air turbulent flow (23 m/s with diameter of pipe = 0.5). In this flow, there are a lot of particles of water like a fog. (diameter of particule = 10-6m to 10-4 m).

So, my inlet condition is for water , the flows = 1.5L/min with U.particles = 23 m/s.
That give me alpha.particles around 10-6.


The goal of my work is with inertia and wall, it's agglomerate water to separate of air in complexe pipe.

The problem with little experience about the multiphase flow, I don't know if I could use twoPhaseEulerFoam, interFoam or an other solver.

Could you help me ?

Best regards.

Last edited by Ptiji; May 3, 2017 at 06:35.
Ptiji is offline   Reply With Quote

Reply

Tags
liquid particles, multiphase flows, solver

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mass imbalance problem in multiphase water and steam CFX case Antech CFX 1 October 26, 2020 05:03
Multiphase Eulerian simluation problem on Fluent 15.0 Hou Fluent Multiphase 1 December 19, 2014 05:01
Which multiphase flow to solve this problem? mariam.sara Fluent Multiphase 3 May 4, 2014 12:04
Problem of B.C. in Eulerian multiphase model Derek Jing FLUENT 0 May 12, 2002 12:52
CF4 - need advice on setting up multiphase problem Brett Towler CFX 2 August 18, 2000 17:38


All times are GMT -4. The time now is 11:49.