|
AMI with moving mesh
2 Attachment(s)
Hello together,
I have a problem with AMI's an moving mesh. I work with OF 4.1. First i connect two easy blocks with an ami, then i give a point/cellmotion on the opposite side of one block, my mesh at the ami gets distorted. The bc on the ami patches are cyclicAMI. When I change the ami's into walls I don't have this problem, because the i can give zero moving condition to the patch. But i need the ami's for my problem. What can I do to hold the nodes on the ami's at the same postion? You can download the case and try it with moveDynamicMesh. Greeting and thanks Nils |
| All times are GMT -4. The time now is 23:23. |