|
[Sponsors] |
June 16, 2017, 04:43 |
problem with my boudary condition
|
#1 |
Member
Join Date: May 2017
Posts: 38
Rep Power: 9 |
Hi,
I work on pimpledymfoam for an external aerodynamic case. When I run pimpledymfoam, I plot the residuals and I can see that all the residuals converge except the pressure. I think my mesh is fine, I tried to change my boundary condition but it doesn't work, the pressure still diverging. Actually I don't know how to choose it and how to do the right choice. Someone can explain me how to proceed or give me some advice for my case? I joined at this post my boundary conditions. Thanks in advance. 0.zip |
|
Tags |
boundary condition, divergence, pimpledyfoam, pressure, residuals |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem with chtMultiregionFoam radiation boundary condition | baran_foam | OpenFOAM Running, Solving & CFD | 10 | December 17, 2019 18:36 |
Conjugate Heat Transfer Problem Coupled Boundary Condition | edmondlam | FLUENT | 13 | October 29, 2019 08:08 |
Problem in setting Boundary Condition | Madhatter92 | CFX | 12 | January 12, 2016 05:39 |
Problem with a periodic boundary condition | chuck209 | CFX | 10 | May 9, 2012 17:15 |
How to use a solution as an inlet boundary condition in another problem in fluent | geryes | FLUENT | 0 | February 25, 2010 17:32 |