Mapping velocity data to a boundary

cyln · July 22, 2017, 15:28

Hello,

I would like to map an experimental data (velocity) to my inlet boundary. The experimental velocity data is not uniform within the boundary. I have checked user guide, it explains how to map computational data from a time step, using mapFields command.

In my case, I have the velocity data in an external file (i.e. csv).

Can someone give me any recommendation on this? I couldnt find any tutorial/documentation about it.

Cheers

sheaker · July 22, 2017, 16:13

Hello.

Using non-uniform inlet profiles in openFOAM:
https://www.youtube.com/watch?v=K-nAF3qAPTc

July 22, 2017, 15:28	Mapping velocity data to a boundary	#1
cyln Senior Member cyln Join Date: Jul 2016 Posts: 102 Rep Power: 9	Hello, I would like to map an experimental data (velocity) to my inlet boundary. The experimental velocity data is not uniform within the boundary. I have checked user guide, it explains how to map computational data from a time step, using mapFields command. In my case, I have the velocity data in an external file (i.e. csv). Can someone give me any recommendation on this? I couldnt find any tutorial/documentation about it. Cheers

July 22, 2017, 16:13		#2
sheaker Senior Member Oskar Join Date: Nov 2015 Location: Poland Posts: 184 Rep Power: 10	Hello. Using non-uniform inlet profiles in openFOAM: https://www.youtube.com/watch?v=K-nAF3qAPTc cyln likes this. __________________ How to set two stroke engine with scavenging? Salome, sliding interface and "Zero length edge detected."

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFD by anderson, chp 10.... supersonic flow over flat plate	varunjain89	Main CFD Forum	18	May 11, 2018 07:31
Error - Solar absorber - Solar Thermal Radiation	MichaelK	CFX	12	September 1, 2016 05:15
Waterwheel shaped turbine inside a pipe simulation problem	mshahed91	CFX	3	January 10, 2015 11:19
Question about heat transfer coefficient setting for CFX	Anna Tian	CFX	1	June 16, 2013 06:28
[Gmsh] Import gmsh msh to Foam	adorean	OpenFOAM Meshing & Mesh Conversion	24	April 27, 2005 08:19