CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

fluxRequired OpenFoam Versions SimpleFoam Taylor Couette flow tutorial

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 9, 2019, 12:50
Default fluxRequired OpenFoam Versions SimpleFoam Taylor Couette flow tutorial
  #1
New Member
 
Join Date: Mar 2019
Posts: 11
Rep Power: 5
mörli is on a distinguished road
Hi everybody,

I am trying to run the Taylor Couette flow tutorial from the wiki pages:
https://wiki.openfoam.com/Taylor_Cou...Andras_Horvath

In the tutorial OpenFoam v1812 is used, while I am trying to get it running on OpenFoam 2.4.x. The first "problem" I faced was OpenFoam asking for RASProperties file. I copied it from another tutorial setting the model to laminar. Anyhow: I assume v1812 reads the information from the turbulenceProperties file while 2.4.x needs the RASProperties file. Is it able to use other settings in v1812 than RAS (and laminar)?

The second problem was OpenFoam telling the following:

--> FOAM FATAL ERROR:
flux requested but p not specified in the fluxRequired sub-dictionary of fvSchemes.


I typed in

fluxRequired
{
default no;
p ;
}

in the fvSchemes taken from another tutorial as well. Nevertheless, I do not understand what this entry is telling me and why it is needed for 2.4.x and not for v1812.

The simulation starts for the first 16 time steps with the adaptions named above. Anyhow, after 16 steps the residuals rise to values above 4000 and the simulation stops (before there look quite good).

Are there any other adaptions that need to be made to run a v1812 case on 2.4.x? Or are there (in general) any reports about comparisons of different versions and their input parameters and solvers? For example I got OpenFoam-dev installed on another machine and it tells me the DyM solvers had been included in the "not DyM" solvers. How can I get to know from which versions on such adaptions have been made? I would like to get a tutorial running on OpenFoam 2.4.x which was created for OpenFoam-dev here as well.

Are the adaptions for the different versions possible in general? Are there any hints/guidelines/... how to proceed?

Thanks a lot and kind regards
mörli
mörli is offline   Reply With Quote

Reply

Tags
fluxrequired, openfoam versions, taylor couette tutorial

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
interFoam vs. simpleFoam channel flow comparison DanM OpenFOAM Running, Solving & CFD 12 January 31, 2020 16:26
Verification of Turbulent Pipe Flow in OpenFOAM - kwSST ajcav2 OpenFOAM Running, Solving & CFD 6 April 28, 2017 16:51
OpenFOAM Training, London, Chicago, Munich, Houston 2016-2017 cfd.direct OpenFOAM Announcements from Other Sources 0 September 14, 2016 04:19
Difficulty running an inviscid compressible nozzle flow using OpenFOAM rbozinoski OpenFOAM Running, Solving & CFD 11 December 29, 2015 08:19
fluid flow fundas ram Main CFD Forum 5 June 17, 2000 22:31


All times are GMT -4. The time now is 05:16.