CFD Online Discussion Forums - fvDOM constantAbsorptionEmission settings

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)

- OpenFOAM Running, Solving & CFD (https://www.cfd-online.com/Forums/openfoam-solving/)

- - fvDOM constantAbsorptionEmission settings (https://www.cfd-online.com/Forums/openfoam-solving/221026-fvdom-constantabsorptionemission-settings.html)

fvDOM constantAbsorptionEmission settings

I'm looking at radiationProperties file in this tutorial: /opt/OpenFOAM/OpenFOAM-v1906/tutorials/heatTransfer/buoyantSimpleFoam/hotRadiationRoomFvDOM

and I am not sure what these values mean:

Code:

absorptionEmissionModel constantAbsorptionEmission;



constantAbsorptionEmissionCoeffs

{

   absorptivity    absorptivity    [ m^-1 ]         0.5;

   emissivity      emissivity      [ m^-1 ]         0.5;

   E               E               [ kg m^-1 s^-3 ] 0;

}

If there's air in the room, isn't it a non-participating medium so these values should be 0 or at least close to 0? What would this mean in practice?

Hi Nejc, did you find an answer?

Imagine the hot room to be a sauna filled with water vapour.
Not a sauna person, imagine a hot summer day with high humidity.
In either way, the water vapour alters the heat transfer by radiation without scattering.