CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

How to set dynamic mesh manually in OpenFOAM.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 13, 2020, 08:05
Default How to set dynamic mesh manually in OpenFOAM.
  #1
New Member
 
ChongQing
Join Date: Jan 2020
Posts: 3
Rep Power: 2
kila is on a distinguished road
My motion is very complex and I have compute mesh of each time step using matlab. The problem is how to pass these mesh into OpenFOAM.

Does anyone has some ideas?
kila is offline   Reply With Quote

Reply

Tags
dynamic mesh

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
decomposePar problem: Cell 0contains face labels out of range vaina74 OpenFOAM Pre-Processing 37 July 20, 2020 05:38
[Other] vtk mesh or Abaqus mesh to OpenFOAM bigphil OpenFOAM Meshing & Mesh Conversion 27 November 23, 2015 17:31
Reconstruction of the parallel case with dynamic mesh makaveli_lcf OpenFOAM Post-Processing 4 July 3, 2014 05:51
OpenFoam 2.1 layerAdditionRemoval dynamic mesh panpanzhong OpenFOAM 0 July 17, 2013 18:11
How to set boundary layer of a moving body in ICEM to a mesh zone for dynamic mesh WassimCFD FLUENT 0 July 13, 2013 14:24


All times are GMT -4. The time now is 16:19.