CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

AMI patches in MRF

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 23, 2020, 02:45
Default AMI patches in MRF
  #1
Senior Member
 
kandelabr's Avatar
 
Nejc
Join Date: Feb 2017
Location: Slovenia
Posts: 150
Rep Power: 5
kandelabr is on a distinguished road
Hello.

I have a MRF case but mesh is joined with a couple of AMI patches.
Why do I have to specify *_ami patches in nonRotatingPatches?
By intuidion I would say it doesn't matter but in my case the results are off by 50% when I don't do that.

Is there an explanation for that behaviour?

Thank you!
__________________
www.damogranlabs.com
kandelabr is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
simpleFoam + MRF properties: FATAL ERROR: not implemented student666 OpenFOAM Running, Solving & CFD 2 June 23, 2019 10:26
Lagrangian particle tracking cannot be run in parallel for the cases with AMI patches Armin.Sh OpenFOAM Running, Solving & CFD 6 December 15, 2017 10:48
Possible bug with stitchMesh and cyclics in OpenFoam Jack001 OpenFOAM Pre-Processing 0 May 21, 2016 08:00
Streamlines and AMI patches johannesk OpenFOAM Post-Processing 5 March 24, 2016 04:13
mixerVesselAMI2D's mass is not balancing sharonyue OpenFOAM Running, Solving & CFD 6 June 10, 2013 09:34


All times are GMT -4. The time now is 01:08.