Solver for evaporation

Michaelfoam · May 19, 2020, 16:19

Hello everyone,

I like to simulate a drying process. In this case I want to evaporate water trough hot air.

I´m searching for a suitable solver.

In this paper: http://www.mathcces.rwth-aachen.de/_..._moltrecht.pdf they use a modified version of the interMixingFoam solver.

My questions are: How difficult would it be to implement the missing equations for example the energy equation to the solver ?

And do you know other suitable solvers for this case ?

I am new to OpenFoam and I would appreciate some help.

ybapat · May 20, 2020, 02:45

You can check sprayFoam

Vitor Monteiro · April 19, 2022, 09:41

Also you can check multiphaseEulerFoam. At openFoam8 you will find bubbleColumnEvaporating tutorial, which could help you!

There is a evaporating model (interfaceCompositionPhaseChangeMultiphaseSystem).

May 19, 2020, 16:19	Solver for evaporation	#1
Michaelfoam New Member Michael Join Date: May 2020 Posts: 3 Rep Power: 5	Hello everyone, I like to simulate a drying process. In this case I want to evaporate water trough hot air. I´m searching for a suitable solver. In this paper: http://www.mathcces.rwth-aachen.de/_..._moltrecht.pdf they use a modified version of the interMixingFoam solver. My questions are: How difficult would it be to implement the missing equations for example the energy equation to the solver ? And do you know other suitable solvers for this case ? I am new to OpenFoam and I would appreciate some help.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Duplicate library entries when running a solver with custom library	francescomarra	OpenFOAM Programming & Development	3	May 17, 2022 08:37
thobois class engineTopoChangerMesh error	Peter_600	OpenFOAM	4	August 2, 2014 09:52
Divergence problem	Smaras	FLUENT	13	February 21, 2013 05:03
3d vof	Smaras	FLUENT	2	February 19, 2013 06:58
why the solver reject it? Anyone with experience?	bearcat	CFX	6	April 28, 2008 14:08

May 20, 2020, 02:45		#2
ybapat Senior Member Yogesh Bapat Join Date: Oct 2010 Posts: 102 Rep Power: 15	You can check sprayFoam

April 19, 2022, 09:41		#3
Vitor Monteiro Member Vitor Monteiro Join Date: Nov 2020 Posts: 32 Rep Power: 5	Also you can check multiphaseEulerFoam. At openFoam8 you will find bubbleColumnEvaporating tutorial, which could help you! There is a evaporating model (interfaceCompositionPhaseChangeMultiphaseSystem).