|
[Sponsors] |
October 27, 2020, 15:08 |
Helyx OS Help
|
#1 |
New Member
|
Can anyone tell me about Helyx OS and if it has any limitations at all??If so exatly what they are and where I can get to know about them.Thanks a lot for your help and kind gesture.
|
|
November 22, 2020, 08:54 |
|
#2 |
Senior Member
|
Hello,
Helyx OS is Open-source Graphical User Interface (GUI) or "Open Source" Edition of the commercial Helyx Software https://engys.com/products "this free of charge Software" has limitations compared to "commerical Software" http://openfoamwiki.net/index.php/GUI there is a Gui tool that also deals with FSI https://www.dhcae-tools.com/CastNet.html "DHCAE FSI coupling between OpenFOAMŪ and CalculiX/Abaqus" https://www.dhcae-tools.com/Simulati....html#txt_1192 as far as I know you can ask for a limited licence for the time of your thesis from "Dr. Heck" it uses "preCICE (Precise Code Interaction Coupling Environment) is a coupling library for partitioned multi-physics simulations" see https://www.precice.org/codes/ which does the mapping from CFD 2 FEM there is a "FSI-Toolkit" completely OF-extend based http://openfoamwiki.net/index.php/Ex...re_interaction |
|
December 9, 2020, 12:18 |
|
#3 |
New Member
|
Thank you sir.This help was highly appreciated.Actually I wanted to use OpenFOAM at first but with GUI due to time constraints and then move on to the real thing in Masters.Unfortunately I could not talk with the representatives of DHCAE online through mail as after providing a reply they closed the discussion when I wanted to proceed.
So I moved onto Salome-CFD.I am currently using that.Pray for my success. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Best GUI for OpenFOAM: Helyx OS or Salome? | BhaluBear | OpenFOAM | 60 | March 11, 2024 09:23 |
Best GUI for OpenFOAM- Visual-CFD or Helyx? | srp1220 | OpenFOAM Running, Solving & CFD | 1 | January 8, 2020 15:17 |
How to add and select solver in Helyx | han0459 | OpenFOAM Running, Solving & CFD | 1 | April 18, 2017 14:46 |
setup ejector unit in helyx os | of_beginner | OpenFOAM Pre-Processing | 0 | November 9, 2016 15:15 |
Force Coeffs using Helyx OS? | akennedy | OpenFOAM Post-Processing | 0 | February 19, 2014 10:15 |