CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

Bubble injection in tundish using twoPhaseEulerFoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 25, 2021, 05:54
Default Bubble injection in tundish using twoPhaseEulerFoam
  #1
New Member
 
Shivam Singhal
Join Date: Feb 2017
Posts: 21
Rep Power: 6
Shivam Singhal is on a distinguished road
Trying to inject bubbles in water tank field using twoPhaseEulerFoam.

My geometry comprises bubble inlet at bottom, atmospheric outlet at top and rest all walls. bubble inlet is small in comparison to water tank.

, but I am getting unexpected high velocities at some regions (specifically near to top outlet), and solver crashes abruptly. I tried both ESI and CFD direct version of openfoam. Please help.
Shivam Singhal is offline   Reply With Quote

Reply

Tags
bubble plume, twophaseeulerfoam

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
TwoPhaseEulerFoam - Bubble diameter size Problem BlnPhoenix OpenFOAM Running, Solving & CFD 8 September 17, 2019 15:59
file injection.: continuity fail; volume injection.: wrong total mass blerli_91 Fluent Multiphase 6 October 2, 2018 05:34
Problem: bubble column with twoPhaseEulerFoam hester OpenFOAM Running, Solving & CFD 6 January 22, 2016 12:25
twoPhaseEulerFoam for modelling bubble plumes davibarreira OpenFOAM Verification & Validation 0 January 6, 2015 07:24
injection problem Mark New FLUENT 0 August 4, 2013 01:30


All times are GMT -4. The time now is 21:02.