CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

Error in match tolerance for simpleFoam solver

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 21, 2023, 21:13
Default Error in match tolerance for simpleFoam solver
  #1
Member
 
Nazmul Islam
Join Date: Feb 2023
Posts: 32
Rep Power: 3
nazmulislam is on a distinguished road
Hi,

I am trying to solve fluid flow problem in a periodic tube by the solver simpleFoam. The fluid is incompressible and flow is laminar. I have imposed the noSlip condition on the tube wall and applied wedge condition as an axisymmetric condition. Also, I have imposed cyclicAMI condition as a periodic condition at the inlet and outlet. When I run the solver simpleFoam in the terminal, I find the error message as in the attachment.

According to the instruction in the message, I have changed the matchtolerance. But still get the same error.


It is mentioned that I have constructed the tube geometry in GMSH and produced the unstructured mesh in GMSH.


Any suggestion will be very helpful for me.
Attached Images
File Type: png Error in patch tolerance.png (28.4 KB, 6 views)
nazmulislam is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Foam::error::printStack(Foam::Ostream&) with simpleFoam -parallel U.Golling OpenFOAM Running, Solving & CFD 52 September 23, 2023 04:35
Fail to converge when solving with a fabricated solution zizhou FLUENT 0 March 22, 2021 07:33
compressible solver rhosimplefoam "sigFe" error ruby_nuaa OpenFOAM Running, Solving & CFD 5 January 8, 2019 20:36
alpha value is negative silviliril OpenFOAM Running, Solving & CFD 1 May 18, 2018 09:44
adapting tolerance of matrix solver danny123 OpenFOAM Running, Solving & CFD 5 May 5, 2015 04:53


All times are GMT -4. The time now is 07:26.