cakaristamuss |
June 18, 2021 08:18 |
pimpleFoam with AMI has Floating point Exteption Point error
Hi guyz,
I think I did good mesh for AMI after the run case I got these messages:
HTML Code:
PIMPLE: iteration 1
AMI: Creating addressing and weights between 307363 source faces and 305683 targ
et faces
AMI: Patch source sum(weights) min:0.00464627 max:2.23371 average:1.02594
AMI: Patch target sum(weights) min:0 max:2.3947 average:1.00556
smoothSolver: Solving for Ux, Initial residual = 1, Final residual = 0.0942844,
No Iterations 11
smoothSolver: Solving for Uy, Initial residual = 1, Final residual = 0.00327133
, No Iterations 1
smoothSolver: Solving for Uz, Initial residual = 1, Final residual = 0.0937322,
No Iterations 11
#0 Foam::error::printStack(Foam::Ostream&) at ??:?
#1 Foam::sigFpe::sigHandler(int) at ??:?
#2 ? in /lib/x86_64-linux-gnu/libpthread.so.0
#3 Foam::divide(Foam::Field<double>&, double const&, Foam::UList<double> const&
) at ??:?
#4 void Foam::divide<Foam::fvPatchField, Foam::volMesh>(Foam::GeometricField<do
uble, Foam::fvPatchField, Foam::volMesh>&, Foam::dimensioned<double> const&, Foa
m::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&) in /usr/lib
/openfoam/openfoam2012/platforms/linux64GccDPInt32Opt/bin/pimpleFoam
#5 Foam::tmp<Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> >
Foam::operator/<Foam::fvPatchField, Foam::volMesh>(Foam::dimensioned<double> con
st&, Foam::tmp<Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> >
const&) in /usr/lib/openfoam/openfoam2012/platforms/linux64GccDPInt32Opt/bin/pi
mpleFoam
#6 ? in /usr/lib/openfoam/openfoam2012/platforms/linux64GccDPInt32Opt/bin/pimpl
eFoam
#7 __libc_start_main in /lib/x86_64-linux-gnu/libc.so.6
#8 ? in /usr/lib/openfoam/openfoam2012/platforms/linux64GccDPInt32Opt/bin/pimpl
eFoam
Floating point exception (core dumped)
My case is below here:
https://drive.google.com/file/d/1tBF...ew?usp=sharing
Any idea to solve problem?
Thanks, Regards.
|