 |
 |
 |
|
|
|
[Sponsors] | ||||
June 24, 2021, 03:33
|
Permeable region (problems with mesh?)
|
#1 |
|
New Member
Luis
Join Date: Oct 2019
Posts: 2
Rep Power: 0  |
Hi all,
I have two meshes related to flow in a permeable region. In membrane_1: the permeable region is on the bottom and the results are as expected. In membrane_2: the permeable region is on the top, so the result should be the opposite of. But for some reason i am getting the same result for both of them and I wonder why. Anyone can help me with that? Thanks in advance! Luis |
|
|
|
|
 |
| Tags |
| permeable wall, porositywall, porous cell zone, porous flow, porous media flow |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [snappyHexMesh] non uniform mesh near the stl object | vava10 | OpenFOAM Meshing & Mesh Conversion | 0 | January 31, 2021 14:41 |
| [mesh manipulation] How to write cellSet for different regions in constant/polyMesh/sets | Struggle_Achieve | OpenFOAM Meshing & Mesh Conversion | 3 | June 17, 2019 09:29 |
| Problem simulating the temperature rise in a composite material (chtMultiRegionFoam) | Adam_K | OpenFOAM Running, Solving & CFD | 2 | March 27, 2019 06:51 |
| Moving mesh | Niklas Wikstrom (Wikstrom) | OpenFOAM Running, Solving & CFD | 122 | June 15, 2014 06:20 |
| [Commercial meshers] Using starToFoam | clo | OpenFOAM Meshing & Mesh Conversion | 33 | September 26, 2012 04:04 |
Linear Mode
