Default 3rd body efficiencies

Gerry Kan · July 6, 2021, 10:01

Howdy Foamers:

Sorry to bother you guys again. Is there a way to supply a default collision efficiency for a third body reaction?

That is, could I assign the same efficiency (e.g., 1.0) to all species in the mechanism in one line instead of specifying this every time a third body reaction is defined?

Thanks in advance, Gerry.

Gerry Kan · July 6, 2021, 10:39

I just realized you can set the "defaultEfficiency" instead of defining the efficiencies for every species. G.

July 6, 2021, 10:01	Default 3rd body efficiencies	#1
Gerry Kan Senior Member Gerry Kan Join Date: May 2016 Posts: 387 Rep Power: 12	Howdy Foamers: Sorry to bother you guys again. Is there a way to supply a default collision efficiency for a third body reaction? That is, could I assign the same efficiency (e.g., 1.0) to all species in the mechanism in one line instead of specifying this every time a third body reaction is defined? Thanks in advance, Gerry.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post Processing Results: Ansys Workbench 18.2 - Fluent - CFD Post - Porous Body	onlycfd	CFX	4	April 29, 2021 04:02
6dof model - floating body	flinde	FLUENT	13	March 6, 2021 15:32
Ahmed Body Validation Study – Autodesk CFD	Nik CFD	Autodesk Simulation CFD	3	February 12, 2021 05:29
CFD codes with body conforming block structured AMR capabilities?	aerosayan	Main CFD Forum	6	January 9, 2021 04:12
how to move a solid body along a clear line	m.r_khani	FLUENT	0	November 26, 2011 08:04

July 6, 2021, 10:39		#2
Gerry Kan Senior Member Gerry Kan Join Date: May 2016 Posts: 387 Rep Power: 12	I just realized you can set the "defaultEfficiency" instead of defining the efficiencies for every species. G.