CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (https://www.cfd-online.com/Forums/openfoam-solving/)
-   -   Boundary conditions for pressure in the interfom solver (https://www.cfd-online.com/Forums/openfoam-solving/239786-boundary-conditions-pressure-interfom-solver.html)

Dmitriy_TSU November 24, 2021 02:25

Boundary conditions for pressure in the interfom solver
 
1 Attachment(s)
Hello!
My question is about computer modeling of the tank filling process. The geometry of the tank is depicted below. What kind of initial and boundary conditions should I specify in order to obtain the case when the pressure in the upper part of the tank (p1) is equal to 10^5 Pa (a constant value), and the pressure in the lower part (p2) is equal to zero (a constant value, providing vacuum conditions).
Thank you in advance!


https://sun9-59.userapi.com/impg/UG7...c23&type=album


All times are GMT -4. The time now is 04:45.