CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

MPPICFoam failed lookup of turbulenceProperties

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 30, 2022, 04:24
Default MPPICFoam failed lookup of turbulenceProperties
  #1
New Member
 
Charl Maré
Join Date: Aug 2020
Location: Pretoria, Gauteng, South Africa
Posts: 1
Rep Power: 0
Charlfmare is on a distinguished road
Dear All,

I doing a test case where I simulate particles travelling along a narrow square duct with a porous baffle (cyclic boundary conditions) located roughly half way between the inlet and outlet using the MPPICFoam solver. (Note I am using OpenFOAM v2112).

I have sorted out allot of issues but now I am stuck on the following error/problem when I am run the solver:

"failed lookup of turbulenceProperties (objectRegistry region0)
available objects of type turbulenceModel:
(turbulenceProperties.air)"


I have looked at other CFD-online posts but they unfortunately were not of much help in the end.

Just a note: The simulation runs when I remove the porous baffle and cyclic boundary conditions and change the faceType (for the cellZone and faceZone setup) in snappyHexMesh from baffle to internal.

I have attached my OpenFOAM case files using to two different archive formats for your convenience.

I would truly appreciate your input on the matter.

Regards,
Charl
Attached Files
File Type: zip TestCase_Particle_PorousBaffle.zip (20.9 KB, 3 views)
File Type: gz TestCase_Particle_PorousBaffle.tar.gz (8.6 KB, 0 views)
Charlfmare is offline   Reply With Quote

Reply

Tags
cyclic boundary condition, lagrangian partices, mppicfoam, openfoam, porous baffle

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Foam::error::printStack(Foam::Ostream&) with simpleFoam -parallel U.Golling OpenFOAM Running, Solving & CFD 52 September 23, 2023 04:35
Long output in terminal. ssa_cfd OpenFOAM Running, Solving & CFD 1 March 18, 2019 06:25
DPMFoam - Serious Error --particle-laden flow in simple geometric config benz25 OpenFOAM Running, Solving & CFD 27 December 19, 2017 21:47
user subroutine error CFDUSER CFX 2 December 9, 2006 07:31
user defined function cfduser CFX 0 April 29, 2006 11:58


All times are GMT -4. The time now is 04:49.