CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

Running InterFoam with dynamic mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 30, 2022, 06:07
Default Running InterFoam with dynamic mesh
  #1
New Member
 
Abhinav Dixit
Join Date: Jun 2019
Posts: 4
Rep Power: 6
Abhinav Dixit is on a distinguished road
Dear Foamers,

Greetings!!

In my current case, I am running a dynamic mesh using interFoam solver. The mesh consists of :
1. Reactor (cylindrical)
2. Rotating blade
3. AMI & AMI slave

I get the following error when I run the simulation.

Courant Number mean: 0.000737738 max: 0.100295
Interface Courant Number mean: 0 max: 0
deltaT = 0.000889417
Time = 0.004742457545

PIMPLE: Iteration 1
AMI: Creating addressing and weights between 2109 source faces and 2114 target faces
AMI: Patch source sum(weights) min/max/average = 0.505246, 1.42922, 0.997779
AMI: Patch target sum(weights) min/max/average = 0, 1.04888, 0.981424
GAMG: Solving for pcorr, Initial residual = 1, Final residual = 0.0764182, No Iterations 4
time step continuity errors : sum local = 1.70225e-09, global = -3.858e-10, cumulative = -1.41026e-08
MULES: Solving for alpha.water
Phase-1 volume fraction = 0.187436 Min(alpha.water) = -8.748e-15 Max(alpha.water) = 1
MULES: Solving for alpha.water
Phase-1 volume fraction = 0.187436 Min(alpha.water) = -8.74782e-15 Max(alpha.water) = 1
#0 Foam::error:rintStack(Foam::Ostream&) at ??:?
#1 Foam::sigFpe::sigHandler(int) at ??:?
#2 ? in "/lib64/libc.so.6"
#3 ? at tensorField.C:?
#4 ? at ??:?
#5 ? at ??:?
#6 ? at ??:?
#7 __libc_start_main in "/lib64/libc.so.6"
#8 ? at ??:?
Floating point exception

Please let me know what is causing this error and how to remove it.

Kind regards and Thanks in advance
AB
Attached Files
File Type: txt epsilon.txt (1.2 KB, 0 views)
File Type: txt k.txt (1.2 KB, 0 views)
File Type: txt nut.txt (1.2 KB, 1 views)
File Type: txt p_rgh.txt (1.3 KB, 1 views)
File Type: txt U.txt (1.2 KB, 2 views)
Abhinav Dixit is offline   Reply With Quote

Old   June 30, 2022, 21:21
Default
  #2
Member
 
Michael Sukham
Join Date: Mar 2020
Location: India
Posts: 78
Rep Power: 6
2538sukham is on a distinguished road
Most probably it is an initial and/or boundary condition. You have a mathematical operation which is illegal like division by zero which OpenFOAM will complain. Can you share the test case. I work with topoChanging mesh with Solver interDyMFoam but not AMI. Would love to check out the case.
With Regards
2538sukham is offline   Reply With Quote

Reply

Tags
dynamicmesh, interfoam, rotating blade

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dynamic mesh for interFoam andrei.cimpoeru OpenFOAM Pre-Processing 0 October 30, 2018 12:13
Dynamic mesh for interFoam andrei.cimpoeru OpenFOAM Running, Solving & CFD 0 October 30, 2018 12:00
[mesh manipulation] Importing Multiple Meshes thomasnwalshiii OpenFOAM Meshing & Mesh Conversion 18 December 19, 2015 19:57
Update of the variables after dynamic mesh motion. gtg258f OpenFOAM Programming & Development 9 January 18, 2014 11:08
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Meshing & Mesh Conversion 2 March 27, 2011 22:11


All times are GMT -4. The time now is 06:12.