CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

Boundary condition in capillary rise

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 12, 2022, 11:31
Default Boundary condition in capillary rise
  #1
New Member
 
Gaurav Kumar
Join Date: Jun 2022
Location: Japan
Posts: 6
Rep Power: 3
kumar.kyutech is on a distinguished road
Hi, I am trying to simulate capillary rise in a channel. My channel consists of a small channel inside the bigger channel (see the figure).

Capture.jpg

As you can see the surface contact angle at the top and bottom walls of the channel is showing correctly but when the fluid is passing through the smaller channel, the wall effect is not showing.

I have given the same wall condition to the smaller channel and bigger channel.

Can someone tell me what could be going wrong?
kumar.kyutech is offline   Reply With Quote

Old   July 7, 2023, 12:52
Default
  #2
New Member
 
Marcus
Join Date: Jul 2022
Posts: 8
Rep Power: 3
MarcusAng is on a distinguished road
Hi Gaurav,

I am working on a similar problem and have some issues setting up the boundary conditions. Did you managed to solve the problem and if so could you share you 0 file?

Thanks,
Marcus
MarcusAng is offline   Reply With Quote

Reply

Tags
blockmesh dict, capillary flow, channel flow, contact angle, volume of fluid.

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
sliding mesh problem in CFX Saima CFX 46 September 11, 2021 08:38
Centrifugal fan j0hnny CFX 13 October 1, 2019 14:55
Basic Nozzle-Expander Design karmavatar CFX 20 March 20, 2016 09:44
Accessing multiple boundary patches from a custom boundary condition file ripudaman OpenFOAM Programming & Development 0 October 22, 2014 19:34
CFX fails to calculate a diffuser pipe flow shenying0710 CFX 7 March 26, 2013 05:13


All times are GMT -4. The time now is 12:02.