|
[Sponsors] |
September 6, 2022, 05:04 |
totalPressure BC gamma problem
|
#1 |
New Member
Seyfi Girgin
Join Date: Aug 2015
Posts: 12
Rep Power: 11 |
Hi all,
I am trying to solve an intake problem using hisa solver. At first outlet is zeroGradient and after some iteration, i am giving total pressure boundary condition at the outlet. Like; type totalPressure; p0 uniform 120000; gamma 1.4; When i check the run after some iteration i am seeing that gamma value turns to 1 by openfoam. I don't understand this. What could be the reason? |
|
Tags |
gamma, intake, outlet, pressure, totalpressure bc |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
area does not match neighbour by ... % -- possible face ordering problem | St.Pacholak | OpenFOAM | 11 | September 4, 2024 05:28 |
Large problem partitioner | tzy | CFX | 3 | February 7, 2018 18:11 |
Heat Transfert, mixing problem | Wazdq | CFX | 8 | November 7, 2016 06:44 |
natural convection problem for a CHT problem | Se-Hee | CFX | 2 | June 10, 2007 07:29 |
Adiabatic and Rotating wall (Convection problem) | ParodDav | CFX | 5 | April 29, 2007 20:13 |