[openSource_Knight]

Hello, i am trying to run my own case with a customized solver
(simpleFoam + scalart transport equation)

this is the error message i get when i try running the case:

Create mesh for time = 0


SIMPLE: no convergence criteria found. Calculations will run for 0.01 steps.

Reading field p

Reading field U

Reading field T

Reading transportProperties

Reading diffusivity DT

Reading/calculating face flux field phi

Selecting incompressible transport model Newtonian
Selecting turbulence model type RAS
Selecting RAS turbulence model kOmega
bounding k, min: 0 max: 0.21 average: 0
bounding omega, min: 0 max: 25.15 average: 0
RAS
{
RASModel kOmega;
turbulence on;
printCoeffs on;
betaStar 0.09;
beta 0.072;
gamma 0.52;
alphaK 0.5;
alphaOmega 0.5;
}

No MRF models present

No finite volume options present
#0 Foam::error:: printStack(Foam::Ostream&) at ??:?
#1 Foam::sigFpe::sigHandler(int) at ??:?
#2 ? in /lib/x86_64-linux-gnu/libpthread.so.0
#3 Foam::divide(Foam::Field<double>&, Foam::UList<double> const&, Foam::UList<double> const&) at ??:?
#4 void Foam::divide<Foam::fvPatchField, Foam::volMesh>(Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh>&, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&) at ??:?
#5 Foam::tmp<Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> > Foam:: operator/<Foam::fvPatchField, Foam::volMesh>(Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&) at ??:?
#6 Foam::RASModels::kOmega<Foam::IncompressibleTurbul enceModel<Foam::transportModel> >::correctNut() at ??:?
#7 ? in ~/OpenFOAM/user-v2106/platforms/linux64GccDPInt32Opt/bin/scalarTransportsimpleFoam
#8 __libc_start_main in /lib/x86_64-linux-gnu/libc.so.6
#9 ? in ~/OpenFOAM/user-v2106/platforms/linux64GccDPInt32Opt/bin/scalarTransportsimpleFoam