CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

OpenFoam running with error.

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   September 20, 2022, 08:07
Default OpenFoam running with error.
New Member
openSource_Knight's Avatar
Join Date: Aug 2022
Location: Italia
Posts: 4
Rep Power: 2
openSource_Knight is on a distinguished road
Hello, i am trying to run my own case with a customized solver
(simpleFoam + scalart transport equation)

this is the error message i get when i try running the case:

Create mesh for time = 0

SIMPLE: no convergence criteria found. Calculations will run for 0.01 steps.

Reading field p

Reading field U

Reading field T

Reading transportProperties

Reading diffusivity DT

Reading/calculating face flux field phi

Selecting incompressible transport model Newtonian
Selecting turbulence model type RAS
Selecting RAS turbulence model kOmega
bounding k, min: 0 max: 0.21 average: 0
bounding omega, min: 0 max: 25.15 average: 0
RASModel kOmega;
turbulence on;
printCoeffs on;
betaStar 0.09;
beta 0.072;
gamma 0.52;
alphaK 0.5;
alphaOmega 0.5;

No MRF models present

No finite volume options present
#0 Foam::error:: printStack(Foam::Ostream&) at ??:?
#1 Foam::sigFpe::sigHandler(int) at ??:?
#2 ? in /lib/x86_64-linux-gnu/
#3 Foam::divide(Foam::Field<double>&, Foam::UList<double> const&, Foam::UList<double> const&) at ??:?
#4 void Foam::divide<Foam::fvPatchField, Foam::volMesh>(Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh>&, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&) at ??:?
#5 Foam::tmp<Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> > Foam:: operator/<Foam::fvPatchField, Foam::volMesh>(Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&) at ??:?
#6 Foam::RASModels::kOmega<Foam::IncompressibleTurbul enceModel<Foam::transportModel> >::correctNut() at ??:?
#7 ? in ~/OpenFOAM/user-v2106/platforms/linux64GccDPInt32Opt/bin/scalarTransportsimpleFoam
#8 __libc_start_main in /lib/x86_64-linux-gnu/
#9 ? in ~/OpenFOAM/user-v2106/platforms/linux64GccDPInt32Opt/bin/scalarTransportsimpleFoam

Last edited by openSource_Knight; September 21, 2022 at 16:57.
openSource_Knight is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Compile calcMassFlowC aurore OpenFOAM Programming & Development 13 March 23, 2018 08:43
[OpenFOAM] Native ParaView Reader Bugs tj22 ParaView 270 January 4, 2016 12:39
Version 15 on Mac OS X gschaider OpenFOAM Installation 113 December 2, 2009 11:23
Installation OF1.5-dev ttdtud OpenFOAM Installation 46 May 5, 2009 03:32
Compiling problems with hello worldC fw407 OpenFOAM Installation 21 January 6, 2008 18:38

All times are GMT -4. The time now is 00:04.