|
INLETS too small compared to the computational domain. A way to model them?
Hello,
Happy new year to you dear Foamers I am currently configuring an HVAC system for a 43x24x8 m^3 calculation domain and have 100 circular air inlets with a diameter of 2cm. My problem is that the mesh is likely to be too large in terms of number of cells if I use intakes of this size. Therefore, I have thought about increasing the diameter of the air inlets to 10cm in order to reduce the number of mesh points. However, I was wondering if you had any other ideas for modeling these air inlets in order to avoid a large number of mesh points ? Thank you in advance for your help! |
| All times are GMT -4. The time now is 06:07. |