Icofsifoam

varun · January 25, 2009, 02:33

Can somebody please send me a small test case that can be used with icofsifoam.

Thanks
Varun

lucausa50 · January 25, 2009, 09:59

Hi, I'm a beginner with openfoam and I need a tutorial for icofsifoam too. Is there something on the web? I need to know what is the structure of folder in which I have to use the solver.
Thank you Luca

mathieu · January 25, 2009, 10:27

Hi,

There is a test case on this link:

http://powerlab.fsb.hr/ped/kturbo/OpenFOAM/run/flappingConsoleSmall_HJ_21Mar2008 .tgz

Mathieu

varun · January 25, 2009, 13:21

Hi Mathieu

Thanks a lot.

Varun

lucausa50 · January 26, 2009, 05:59

Thank you
Luca

izem · March 7, 2009, 14:56

Hi Mathieu,
I'm a beginer OpenFoam user. Can you give me some lines command to how to use this icofsifoam case.

Thanks in advance.
Izem

mathieu · March 8, 2009, 12:59

Hi Izem,

On OF-1.4.1-dev, go in the "fsi-case-directory" and type:

blockMesh . solid
blockMesh . fluid
icoFsiFoam . fluid
foamToVTK . fluid
foamToVTK . fluid -mesh solid

On OF 1.5-dev, go in the "fsi-case-directory/fluid" and type:

blockMesh -region solid
blockMesh
icoFsiFoam
foamToVTK
foamToVTK -region solid

Then, you can see the solution in paraview by choosing the appropriate VTK files (you can access the fluid and the solid region in the same paraview instance). Using paraFoam works, but you'll have only access to the fluid part (or the solid part if you create symbolic links...). Good luck,

Mathieu

izem · March 10, 2009, 17:07

Hi Mathieu

Thank you

Izem

mrshb4 · April 27, 2011, 06:10

Hi Mathieu

I ran the tutorial and that was great specially in postprocessing. But as I can see here the data of sigmaxx, sigmayy ,...... haven't been stored. Does this solver icoFSIFoam calculate them at all?!

Thank you
Mohammadreza

January 25, 2009, 02:33	Can somebody please send me a	#1
varun New Member Varun Vikas Join Date: Mar 2009 Posts: 17 Rep Power: 17	Can somebody please send me a small test case that can be used with icofsifoam. Thanks Varun

January 25, 2009, 09:59	Hi, I'm a beginner with openfo	#2
lucausa50 New Member Luca Vullo Join Date: Mar 2009 Posts: 2 Rep Power: 0	Hi, I'm a beginner with openfoam and I need a tutorial for icofsifoam too. Is there something on the web? I need to know what is the structure of folder in which I have to use the solver. Thank you Luca

January 25, 2009, 10:27	Hi, There is a test case on	#3
mathieu Member Mathieu Olivier Join Date: Mar 2009 Location: Quebec City, Canada Posts: 77 Rep Power: 17	Hi, There is a test case on this link: http://powerlab.fsb.hr/ped/kturbo/OpenFOAM/run/flappingConsoleSmall_HJ_21Mar2008 .tgz Mathieu

January 25, 2009, 13:21	Hi Mathieu Thanks a lot.	#4
varun New Member Varun Vikas Join Date: Mar 2009 Posts: 17 Rep Power: 17	Hi Mathieu Thanks a lot. Varun

January 26, 2009, 05:59	Thank you Luca	#5
lucausa50 New Member Luca Vullo Join Date: Mar 2009 Posts: 2 Rep Power: 0	Thank you Luca

March 7, 2009, 14:56	Hi Mathieu, I'm a beginer Ope	#6
izem New Member izem Join Date: Mar 2009 Posts: 2 Rep Power: 0	Hi Mathieu, I'm a beginer OpenFoam user. Can you give me some lines command to how to use this icofsifoam case. Thanks in advance. Izem

March 8, 2009, 12:59	Hi Izem, On OF-1.4.1-dev, g	#7
mathieu Member Mathieu Olivier Join Date: Mar 2009 Location: Quebec City, Canada Posts: 77 Rep Power: 17	Hi Izem, On OF-1.4.1-dev, go in the "fsi-case-directory" and type: blockMesh . solid blockMesh . fluid icoFsiFoam . fluid foamToVTK . fluid foamToVTK . fluid -mesh solid On OF 1.5-dev, go in the "fsi-case-directory/fluid" and type: blockMesh -region solid blockMesh icoFsiFoam foamToVTK foamToVTK -region solid Then, you can see the solution in paraview by choosing the appropriate VTK files (you can access the fluid and the solid region in the same paraview instance). Using paraFoam works, but you'll have only access to the fluid part (or the solid part if you create symbolic links...). Good luck, Mathieu

March 10, 2009, 17:07	Hi Mathieu Thank you Ize	#8
izem New Member izem Join Date: Mar 2009 Posts: 2 Rep Power: 0	Hi Mathieu Thank you Izem

April 27, 2011, 06:10		#9
mrshb4 Member Mohammad.R.Shetab Join Date: Jul 2010 Posts: 49 Rep Power: 15	Hi Mathieu I ran the tutorial and that was great specially in postprocessing. But as I can see here the data of sigmaxx, sigmayy ,...... haven't been stored. Does this solver icoFSIFoam calculate them at all?! Thank you Mohammadreza

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
IcoFsiFoam	vinz	OpenFOAM Running, Solving & CFD	14	November 3, 2010 06:20
Problem with icoFsiFoam in the latest OFdev	mathieu	OpenFOAM Bugs	7	September 23, 2010 08:22
Errors in running a icoFsiFoam case	jin_xu	OpenFOAM Pre-Processing	0	June 9, 2008 06:48
Errors in compling icoFsiFoam	jin_xu	OpenFOAM Running, Solving & CFD	5	June 4, 2008 20:15
IcoFsiFoam tutorial	pbo	OpenFOAM Running, Solving & CFD	0	March 6, 2008 09:02