CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

A question about starting computation from an acquired result

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 8, 2009, 22:39
Default I run "simpleFoam" solver to c
  #1
New Member
 
Jia Rui
Join Date: Mar 2009
Posts: 9
Rep Power: 17
jennyrui2008 is on a distinguished road
I run "simpleFoam" solver to calculate a flow field to step 600. Then I changed the discretization scheme for div(phi, U) from "upwind" to "QUICK". Then I modified "startFrom" entry as "startTime" and set "startTime" as "600" in the "controldict" file, and run "simpleFoam" again. But the following error message appeared as follows:

/*---------------------------------------------------------------------------*\
| ========= | |
| \ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \ / O peration | Version: 1.5 |
| \ / A nd | Web: http://www.OpenFOAM.org |
| \/ M anipulation | |
\*---------------------------------------------------------------------------*/
Exec : simpleFoam
Date : Jan 09 2009
Time : 10:41:38
Host : ff02
PID : 4581
Case : /home/jiarui/OpenFOAM/jiarui-1.5/run/UCUF04K_Re16000/CellNo_595026_KOmega_simple Foam_From600
nProcs : 1

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 600

Reading field p

Reading field U

Reading/calculating face flux field phi

Selecting incompressible transport model Newtonian
Selecting RAS turbulence model kOmegaSST
#0 Foam::error::printStack(Foam:stream&) in "/home/jiarui/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so"
#1 Foam::sigFpe::sigFpeHandler(int) in "/home/jiarui/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so"
#2 ?? in "/lib64/libc.so.6"
#3 Foam::divide(Foam::Field<double>&, Foam::UList<double> const&, Foam::UList<double> const&) in "/home/jiarui/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so"
#4 void Foam::divide<foam::fvpatchfield,>(Foam::GeometricF ield<double,>&, Foam::GeometricField<double,> const&, Foam::GeometricField<double,> const&) in "/home/jiarui/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libincompressibleRASMode ls.so"
#5 Foam::tmp<foam::geometricfield<double,> > Foam::operator/<foam::fvpatchfield,>(Foam::tmp<foam::geometricfie ld<double,> > const&, Foam::tmp<foam::geometricfield<double,> > const&) in "/home/jiarui/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libincompressibleRASMode ls.so"
#6 Foam::incompressible::RASModels::kOmegaSST::F2() const in "/home/jiarui/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libincompressibleRASMode ls.so"
#7 Foam::incompressible::RASModels::kOmegaSST::kOmega SST(Foam::GeometricField<foam: :vector<double>, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double,> const&, Foam::transportModel&) in "/home/jiarui/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libincompressibleRASMode ls.so"
#8 Foam::incompressible::RASModel::adddictionaryConst ructorToTable<foam::incompress ible::rasmodels::komegasst>::New(Foam::GeometricFi eld<foam::vector<double>, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double,> const&, Foam::transportModel&) in "/home/jiarui/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libincompressibleRASMode ls.so"
#9 Foam::incompressible::RASModel::New(Foam::Geometri cField<foam::vector<double>, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double,> const&, Foam::transportModel&) in "/home/jiarui/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libincompressibleRASMode ls.so"
#10 main in "/home/jiarui/OpenFOAM/OpenFOAM-1.5/applications/bin/linux64GccDPOpt/simpleFoam"
#11 __libc_start_main in "/lib64/libc.so.6"
#12 Foam::regIOobject::readIfModified() in "/home/jiarui/OpenFOAM/OpenFOAM-1.5/applications/bin/linux64GccDPOpt/simpleFoam"


Can anyone help me out? Thanks in advance!!!
jennyrui2008 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
A question of starting computation from an acquired result jennyrui2008 OpenFOAM Running, Solving & CFD 0 January 8, 2009 22:38
question on data access in parallel computation wangrensong FLUENT 0 January 7, 2009 04:24
Question on starting multiphase simulation Derek Jing FLUENT 2 April 30, 2002 11:32


All times are GMT -4. The time now is 12:40.