CFD Online Discussion Forums

CFD Online Discussion Forums (
-   OpenFOAM Running, Solving & CFD (
-   -   OscillatingVelocity in Parallel (

pbo December 27, 2008 19:28

Hello guys, Are the boundar
Hello guys,

Are the boundary conditions "oscillatingVelocity" and "angularOscillatingVelocity" implemented for parallel computations? (1.4.1 and 1.4.1-dev)

On a 3D mesh, fixedValue BCs in pointMotionU work fine both in serial and parallel modes, but if I use oscillatingVelocity and Co, it only works in serial mode. In parallel, I then get the following error message (snippet):

[3] Nprocs : 4
Create dynamic mesh for time = 0

Selecting dynamicFvMesh dynamicMotionSolverFvMesh
Selecting motion solver: velocityLaplacian
[0] --> FOAM FATAL ERROR : Not implemented
[0] From function defaultFvPatchField<type>::defaultFvPatchField(con st fvPatch& p, const DimensionedField<type,>& iF)
[0] in file fields/fvPatchFields/basic/default/defaultFvPatchField.C at line 50.
FOAM parallel run aborting

Is it implemented in 1.5 or in the latest 1.4.1-dev?



All times are GMT -4. The time now is 18:02.