|
[Sponsors] |
![]() |
![]() |
#1 |
Member
florian
Join Date: Mar 2009
Location: Mannheim - Vincennes - Valenciennes, Deutchland - France
Posts: 34
Rep Power: 18 ![]() |
Hi,
I work on a 3D mesh without bondary layer at the inlet, I want to have U=0.05 m/s and on the wall U=0 I integer the U profile with excel It has to be U*S This is my inlet face .-.-.-.-. | | | | | .-.-.-.-. | | | | | .-.-.-.-. | | | | | .-.-.-.-. | | | | | .-.-.-.-. 16/25 points belong to the wall and only 9/25 belong to the inlet I tried to change the order of boundary conditions in case/0/U but without results. Florian |
|
![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
Mattijs Janssens
Join Date: Mar 2009
Posts: 1,419
Rep Power: 27 ![]() |
The boundary conditions are applied to the faces, not to the points. So think about what average velocity you want to go into a face.
|
|
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Burgerbs equation non constant Boundary Conditions Initial Conditions | arkangel | OpenFOAM Running, Solving & CFD | 1 | October 2, 2008 14:48 |
Boundary conditions for turbulent boundary layer | Thomas | FLUENT | 1 | June 17, 2008 05:14 |
Integral boundary conditions turbulent intensitylength boundary conditions | olesen | OpenFOAM Running, Solving & CFD | 0 | July 27, 2006 07:18 |
CFX Runtime Priority | Karsten | CFX | 0 | April 26, 2006 04:33 |
High Priority!!! Please Help | Sandeep | Siemens | 0 | July 12, 2005 13:28 |