Announcement for an discrete element code for foam

stephan · February 16, 2007, 09:53

hi all,

in two or three weeks i will set a link for a dem-code based on liblagrangian ( i have to clean up the code first).
the code uses the spring-damper-model from tsuji and will therefore be easy to extend to other collisionmodels.
it allows collsions between more than two particles at the same time and uses a cell-linking algorithm to achieve better perfomance. it could be interesting for people doing mol. dynamics or dense particle-flows.
anybody interested?
stephan

hemph · February 16, 2007, 11:57

Hi Stephan,
This sounds interesting! I have done a bit of DEM-simulations using OpenFOAM. I would be happy to see how you have implemented the algorithm and perhaps share some experience I gained in my project.

//Rasmus Hemph

coastal593 · February 16, 2007, 12:01

i would be very interested in working with this. i look forward to your release ...

ac;

stephan · March 16, 2007, 10:23

hi,

since i have almost no time rightnow it will take some weeks more - but here 3 pics from a simulation (kuipers, jie li " Gas-particle interactions in dense gas-fluidized beds" -2003)
first the situation just after the start and two pics after some seconds.
(gas flows come from the whole base plate)

the point on these pics is that there is no overlapping.
Stephan

coastal593 · June 28, 2007, 11:42

any luck with this? still very interested.

stephan · June 29, 2007, 09:51

hi,

sorry that the source still isnt there - i am still havent clean up the source -about 60% of the works is done. the source will be online in two weeks - i promise

!
i am just pretty busy - i started my pdh and was busy finding somebody how wants to pay for this phd-project....

greetings
stephan

stephan · July 15, 2007, 12:57

hi,

i made it finally to pack a version of my DEM application.
If anybody wants a copy, write me an email and i will send you a copy.

greetings
stephan

hsieh · July 16, 2007, 08:50

Dear Stephan,

I am interested. Could you please send me a copy? Thanks!

phsieh2005@yahoo.com

stephan · July 21, 2007, 15:09

hi,

in case some of the foamers which got the source from the dem are actually using the code:
you should double the depth of the bed in blockMeshDict from 0.002 to 0.004 (the size of the particles) and higher the inlet velocity a bit.
sorry for the messed up case-dir..
greeting
stephan

stephan · July 22, 2007, 17:20

hi,

i hope everybody who wanted the sources got them. if not just write an email.
greetings
stephan

su_junwei · July 22, 2007, 23:04

Dear Stephan,

I am interested. Could you please send me a copy? Many thanks!
sujunwei@gmail.com

benru · July 23, 2007, 01:52

Stephan, could you send me a copy of sources ?

Best regards,
Ruben

stephan · July 23, 2007, 12:28

hi,

i had some trouble writing a mail to Sreekanth Pannala - no matter if i attach something or not the mail comes back with an failure notice, which includes the information that the mail couldnt be delivered.

greetings
stephan

coastal593 · July 23, 2007, 13:00

hi there,

Could you send me a copy? I emailed you a bit ago but perhaps I got the wrong address. My email is abcosta@purdue.edu

Thanks
Anthony

July 28, 2007, 13:29

Dear Stephan,
Could you please send me a copy? Thanks!

dbxmcf · July 28, 2007, 15:21

Dear Stephan,
Could you please send me a copy to fchen3@utk.edu? Thanks!

hsieh · July 29, 2007, 17:14

Hi, Stephan,

I still have not gotten the code yet. Could you please send it again? Thanks!

Pei

phsieh2005@yahoo.com
peiying2006@gmail.com

alexanderrudert · July 30, 2007, 13:40

Hi, Stephan,

I`m interested too. Could you please send me a copy?

alexander.rudert@imfd.tu-freiberg.de

Thanks Alex

stephan · July 30, 2007, 18:27

hi,

after sending sources to about 20 people i guess that it will be much more efficient to put it on the wiki....

since i am quite busy right now this will happen in the end of september.

greetings
stephan

dyxu · August 4, 2007, 23:33

is your code coupled? how did you implement it?

February 16, 2007, 09:53	hi all, in two or three wee	#1
stephan Senior Member Stephan Gerber Join Date: Mar 2009 Location: Germany Posts: 118 Rep Power: 18	hi all, in two or three weeks i will set a link for a dem-code based on liblagrangian ( i have to clean up the code first). the code uses the spring-damper-model from tsuji and will therefore be easy to extend to other collisionmodels. it allows collsions between more than two particles at the same time and uses a cell-linking algorithm to achieve better perfomance. it could be interesting for people doing mol. dynamics or dense particle-flows. anybody interested? stephan m9819348 and roozbeh_s like this.

February 16, 2007, 11:57	Hi Stephan, This sounds inte	#2
hemph Senior Member Rasmus Hemph Join Date: Mar 2009 Location: Sweden Posts: 108 Rep Power: 18	Hi Stephan, This sounds interesting! I have done a bit of DEM-simulations using OpenFOAM. I would be happy to see how you have implemented the algorithm and perhaps share some experience I gained in my project. //Rasmus Hemph

February 16, 2007, 12:01	i would be very interested in	#3
coastal593 Member Anthony Costa Join Date: Mar 2009 Posts: 40 Rep Power: 18	i would be very interested in working with this. i look forward to your release ... ac;

March 16, 2007, 10:23	hi, since i have almost no	#4
stephan Senior Member Stephan Gerber Join Date: Mar 2009 Location: Germany Posts: 118 Rep Power: 18	hi, since i have almost no time rightnow it will take some weeks more - but here 3 pics from a simulation (kuipers, jie li " Gas-particle interactions in dense gas-fluidized beds" -2003) first the situation just after the start and two pics after some seconds. (gas flows come from the whole base plate) the point on these pics is that there is no overlapping. Stephan

June 28, 2007, 11:42	any luck with this? still very	#5
coastal593 Member Anthony Costa Join Date: Mar 2009 Posts: 40 Rep Power: 18	any luck with this? still very interested.

June 29, 2007, 09:51	hi, sorry that the source s	#6
stephan Senior Member Stephan Gerber Join Date: Mar 2009 Location: Germany Posts: 118 Rep Power: 18	hi, sorry that the source still isnt there - i am still havent clean up the source -about 60% of the works is done. the source will be online in two weeks - i promise! i am just pretty busy - i started my pdh and was busy finding somebody how wants to pay for this phd-project.... greetings stephan

July 15, 2007, 12:57	hi, i made it finally to pa	#7
stephan Senior Member Stephan Gerber Join Date: Mar 2009 Location: Germany Posts: 118 Rep Power: 18	hi, i made it finally to pack a version of my DEM application. If anybody wants a copy, write me an email and i will send you a copy. greetings stephan

July 16, 2007, 08:50	Dear Stephan, I am interest	#8
hsieh Senior Member Pei-Ying Hsieh Join Date: Mar 2009 Posts: 317 Rep Power: 19	Dear Stephan, I am interested. Could you please send me a copy? Thanks! phsieh2005@yahoo.com

July 21, 2007, 15:09	hi, in case some of the foa	#9
stephan Senior Member Stephan Gerber Join Date: Mar 2009 Location: Germany Posts: 118 Rep Power: 18	hi, in case some of the foamers which got the source from the dem are actually using the code: you should double the depth of the bed in blockMeshDict from 0.002 to 0.004 (the size of the particles) and higher the inlet velocity a bit. sorry for the messed up case-dir.. greeting stephan

July 22, 2007, 17:20	hi, i hope everybody who wa	#10
stephan Senior Member Stephan Gerber Join Date: Mar 2009 Location: Germany Posts: 118 Rep Power: 18	hi, i hope everybody who wanted the sources got them. if not just write an email. greetings stephan

July 22, 2007, 23:04	Dear Stephan, I am interest	#11
su_junwei Senior Member su junwei Join Date: Mar 2009 Location: Xi'an China Posts: 151 Rep Power: 21	Dear Stephan, I am interested. Could you please send me a copy? Many thanks! sujunwei@gmail.com

July 23, 2007, 01:52	Stephan, could you send me a c	#12
benru Member Ruben I. Mukhamadeev Join Date: Mar 2009 Location: Obninsk, Kaluga reg., Russian Federation Posts: 69 Rep Power: 18	Stephan, could you send me a copy of sources ? Best regards, Ruben

July 23, 2007, 12:28	hi, i had some trouble writ	#13
stephan Senior Member Stephan Gerber Join Date: Mar 2009 Location: Germany Posts: 118 Rep Power: 18	hi, i had some trouble writing a mail to Sreekanth Pannala - no matter if i attach something or not the mail comes back with an failure notice, which includes the information that the mail couldnt be delivered. greetings stephan

July 23, 2007, 13:00	hi there, Could you send me	#14
coastal593 Member Anthony Costa Join Date: Mar 2009 Posts: 40 Rep Power: 18	hi there, Could you send me a copy? I emailed you a bit ago but perhaps I got the wrong address. My email is abcosta@purdue.edu Thanks Anthony

July 28, 2007, 13:29	Dear Stephan, Could you plea	#15
cfdfans Guest Posts: n/a	Dear Stephan, Could you please send me a copy? Thanks!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
IcoTopo mixerMeshslide Foam Code	pilot	OpenFOAM Running, Solving & CFD	6	September 19, 2006 14:31
code for finite element	Jerry	Main CFD Forum	0	March 17, 2004 23:07
anyone doing discrete element + fluid?	George Bergantz	Main CFD Forum	0	September 28, 2002 02:33
Discrete element method?	Ki Ha Hong	Main CFD Forum	1	May 28, 1999 10:46

July 28, 2007, 15:21	Dear Stephan, Could you pleas	#16
dbxmcf Member roy fokker Join Date: Mar 2009 Posts: 44 Rep Power: 18	Dear Stephan, Could you please send me a copy to fchen3@utk.edu? Thanks!

July 29, 2007, 17:14	Hi, Stephan, I still have n	#17
hsieh Senior Member Pei-Ying Hsieh Join Date: Mar 2009 Posts: 317 Rep Power: 19	Hi, Stephan, I still have not gotten the code yet. Could you please send it again? Thanks! Pei phsieh2005@yahoo.com peiying2006@gmail.com

July 30, 2007, 13:40	Hi, Stephan, I`m intereste	#18
alexanderrudert New Member Alexander Rudert Join Date: Mar 2009 Posts: 1 Rep Power: 0	Hi, Stephan, I`m interested too. Could you please send me a copy? alexander.rudert@imfd.tu-freiberg.de Thanks Alex

July 30, 2007, 18:27	hi, after sending sources t	#19
stephan Senior Member Stephan Gerber Join Date: Mar 2009 Location: Germany Posts: 118 Rep Power: 18	hi, after sending sources to about 20 people i guess that it will be much more efficient to put it on the wiki.... since i am quite busy right now this will happen in the end of september. greetings stephan

August 4, 2007, 23:33	is your code coupled? how did	#20
dyxu New Member D.Y.Xu Join Date: Mar 2009 Posts: 7 Rep Power: 18	is your code coupled? how did you implement it?