|
[Sponsors] |
August 28, 2008, 17:51 |
hello forum,
I learning openf
|
#1 |
Member
Sachin Kanetkar
Join Date: Mar 2009
Posts: 57
Rep Power: 17 |
hello forum,
I learning openfoam with interest to solve 2 phase flow.... after whatever i have tried and read i didnt get anything over 2 phase flow where one phase would be solid particles....any suggestion....ideas then i also have to look upon modeling in a cylindrical block...was going through TurbomachinaryWG group.... files to get some idea....although interesting...the main idea cylindrical co-ord how it can we implemented...with derivatives along angulr direction are set to 0.... there is one strange message coming in interFoam, when running from FoamX(otherwise it works fine from terminal)...infact when i run FoamX inerFoam shows a red solid cirle ...i try to unlock case..and again retry to open the case ..error msg case operation failed... getApplication::Invalid aplication class name "interFoam" Although if anyboy has nothing to talk about interFoam ...but prefer to get the suggestion for above topic Thanks in advance Sachin |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
need references for Liquid-liquid two-phase flow | qunwuhe@hotmail.com | Main CFD Forum | 1 | December 8, 2009 04:32 |
Solid-liquid flow | Reena | CFX | 7 | March 14, 2007 04:20 |
Help: solid-liquid flow | Derek Jing | CFX | 4 | June 12, 2002 15:34 |
Solid-liquid flow CFX-4 or CFX-5 | Vitidphan | CFX | 1 | June 4, 2001 22:07 |
Solid-Liquid Two Phase Flow Numerical Simulation with the Finite Element Method | Qing Hao | Main CFD Forum | 2 | January 9, 1999 00:31 |