XiFoam janafthermo error AT

tavasoly · July 1, 2008, 02:50

Hi everybody.
I model simple bunsen flame with pilot by xifoam solver of openfoam 1.4.1. but tempreture in some cell (in premixed core) is lower than 300k and finaly it aborted by out of janafthermo error.(my lowest Tin boundary is 300k)
I do anything such as low curant number(co=0.1) , finner mesh, chaneg tolerance, increese piso corection, channg discretization scheme,... but is not benefit and abort by that error.
Can someone help me?
if anyone havw a case by this solver please send me.
Thanks a lot.

david_h · July 1, 2008, 11:15

Tavasoly,

You can make a case for XiFoam by modifying the Xoodles tutorial case, $FOAM_TUTORIALS/Xoodles/pitzDaily.

You will also need copy information from:
"constant/turbulenceProperties"
"system/controlDict"
"system/fvSchemes"
in $FOAM_TUTORIALS/XiFoam/moriyoshiHomogeneous and copy "0/epsilon" from $FOAM_TUTORIALS/simpleFoam/pitzDaily

Also, a schematic of the problem/system you are trying to solve might help the readers of the forum provide additional strategies to stabilize the simulation you are currently working on.

July 1, 2008, 02:50	Hi everybody. I model simple	#1
tavasoly New Member a_tavasoly Join Date: Mar 2009 Posts: 9 Rep Power: 17	Hi everybody. I model simple bunsen flame with pilot by xifoam solver of openfoam 1.4.1. but tempreture in some cell (in premixed core) is lower than 300k and finaly it aborted by out of janafthermo error.(my lowest Tin boundary is 300k) I do anything such as low curant number(co=0.1) , finner mesh, chaneg tolerance, increese piso corection, channg discretization scheme,... but is not benefit and abort by that error. Can someone help me? if anyone havw a case by this solver please send me. Thanks a lot.

July 1, 2008, 11:15	Tavasoly, You can make a ca	#2
david_h Member E. David Huckaby Join Date: Mar 2009 Posts: 57 Rep Power: 17	Tavasoly, You can make a case for XiFoam by modifying the Xoodles tutorial case, $FOAM_TUTORIALS/Xoodles/pitzDaily. You will also need copy information from: "constant/turbulenceProperties" "system/controlDict" "system/fvSchemes" in $FOAM_TUTORIALS/XiFoam/moriyoshiHomogeneous and copy "0/epsilon" from $FOAM_TUTORIALS/simpleFoam/pitzDaily Also, a schematic of the problem/system you are trying to solve might help the readers of the forum provide additional strategies to stabilize the simulation you are currently working on.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Inconsistent declaration of hConstThermo vs janafThermo	dominik_christ	OpenFOAM Bugs	6	October 31, 2008 04:15
Run pitzdaily with xifoam	tavasoly	OpenFOAM Running, Solving & CFD	0	July 8, 2008 04:25
XiFOAM tutorial Problem	21kalee	OpenFOAM Running, Solving & CFD	0	April 22, 2008 18:18
XiFoam question	burningman	OpenFOAM Running, Solving & CFD	0	November 15, 2005 06:04
Question about XiFoam	pratap	OpenFOAM Running, Solving & CFD	1	April 22, 2004 04:39