[cfdphil]

Hi,

I'm starting to use the rhoSimpleFoam solver and variations of this. I can't get the solution start as it comes up with an error after selecting the turbulence model. Does anyone know what this means:



Create mesh for time = 0

Reading thermophysical properties

Selecting thermodynamics package hThermo<puremixture<consttransport<speciethermo<hc onstthermo<perfectgas>>>>>
Reading field U

Reading/calculating face flux field phi

Creating turbulence model

Selecting turbulence model realizableKE
#0 Foam::error::printStack(Foam:stream&) in "/home/phil/OpenFOAM/OpenFOAM-1.4.1/lib/linux64GccDPOpt/libOpenFOAM.so"
#1 Foam::sigFpe::sigFpeHandler(int) in "/home/phil/OpenFOAM/OpenFOAM-1.4.1/lib/linux64GccDPOpt/libOpenFOAM.so"
#2 ?? in "/lib64/tls/libc.so.6"
#3 Foam::compressible::turbulenceModels::realizableKE ::realizableKE(Foam::Geometric Field<double,> const&, Foam::GeometricField<foam::vector<double>, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double,> const&, Foam::basicThermo&) in "/home/phil/OpenFOAM/OpenFOAM-1.4.1/lib/linux64GccDPOpt/libcompressibleTurbulenc eModels.so"
#4 Foam::compressible::turbulenceModel::adddictionary ConstructorToTable<foam::compr essible::turbulencemodels::realizableke>::New(Foam ::GeometricField<double,> const&, Foam::GeometricField<foam::vector<double>, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double,> const&, Foam::basicThermo&) in "/home/phil/OpenFOAM/OpenFOAM-1.4.1/lib/linux64GccDPOpt/libcompressibleTurbulenc eModels.so"
#5 Foam::compressible::turbulenceModel::New(Foam::Geo metricField<double,> const&, Foam::GeometricField<foam::vector<double>, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double,> const&, Foam::basicThermo&) in "/home/phil/OpenFOAM/OpenFOAM-1.4.1/lib/linux64GccDPOpt/libcompressibleTurbulenc eModels.so"
#6 main in "/home/phil/OpenFOAM/OpenFOAM-1.4.1/applications/bin/linux64GccDPOpt/rhoSimpleFo am"
#7 __libc_start_main in "/lib64/tls/libc.so.6"
#8 Foam::regIOobject::readIfModified() in "/home/phil/OpenFOAM/OpenFOAM-1.4.1/applications/bin/linux64GccDPOpt/rhoSimpleFo am"


Thanks,

Phil

[cfdphil]

It's ok, found the problem,

initial value for p set to 0 !!