Radiative boundary conditions

diegon · December 14, 2006, 13:09

Hi everybody,

I am working on radiative transfer equation solving by the simplified spherical harmonics method (SP_1).

I would like to know if the snGrad operator can update the value of the gradient value on a boundary if this is set as a fixedGradient.

Thanks in advance

Diego

panara · December 15, 2006, 03:32

Hi Diego,

if you search for the conjugateFoam solver in the discussion and you give a look on it, there is a way of updating the fixed gradient boundary condition..

Hope it can help,

Daniele

diegon · December 15, 2006, 05:03

Thank you very much Daniele, it works.

Diego

panara · December 15, 2006, 05:13

Dear Diego,

I am also interested in radiation and wall heat transfer, when you are done it would be nice if you can upload your solver..

think about that =)

Daniele

braennstroem · July 2, 2007, 08:27

Hi Diego,

I would like to use OpenFoam for radiation too. It would be nice, if you upload your solver... :-)

Maybe, someone else did some coding step into radiation problems!?

Regards!
Fabian

December 14, 2006, 13:09	Hi everybody, I am working	#1
diegon New Member diego n. Join Date: Mar 2009 Posts: 17 Rep Power: 17	Hi everybody, I am working on radiative transfer equation solving by the simplified spherical harmonics method (SP_1). I would like to know if the snGrad operator can update the value of the gradient value on a boundary if this is set as a fixedGradient. Thanks in advance Diego

December 15, 2006, 03:32	Hi Diego, if you search for	#2
panara Senior Member Daniele Panara Join Date: Mar 2009 Posts: 101 Rep Power: 17	Hi Diego, if you search for the conjugateFoam solver in the discussion and you give a look on it, there is a way of updating the fixed gradient boundary condition.. Hope it can help, Daniele

December 15, 2006, 05:03	Thank you very much Daniele, i	#3
diegon New Member diego n. Join Date: Mar 2009 Posts: 17 Rep Power: 17	Thank you very much Daniele, it works. Diego

December 15, 2006, 05:13	Dear Diego, I am also inter	#4
panara Senior Member Daniele Panara Join Date: Mar 2009 Posts: 101 Rep Power: 17	Dear Diego, I am also interested in radiation and wall heat transfer, when you are done it would be nice if you can upload your solver.. think about that =) Daniele

July 2, 2007, 08:27	Hi Diego, I would like to u	#5
braennstroem Senior Member Fabian Braennstroem Join Date: Mar 2009 Posts: 407 Rep Power: 19	Hi Diego, I would like to use OpenFoam for radiation too. It would be nice, if you upload your solver... :-) Maybe, someone else did some coding step into radiation problems!? Regards! Fabian

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Burgerbs equation non constant Boundary Conditions Initial Conditions	arkangel	OpenFOAM Running, Solving & CFD	1	October 2, 2008 14:48
Boundary conditions for turbulent boundary layer	Thomas	FLUENT	1	June 17, 2008 05:14
boundary conditions for boundary layer flow	A. Al-zoubi	CFX	0	November 3, 2007 07:11
Integral boundary conditions turbulent intensitylength boundary conditions	olesen	OpenFOAM Running, Solving & CFD	0	July 27, 2006 07:18
Radiative boundary Condition	Andrew McMullan	Main CFD Forum	0	April 15, 2004 10:58