Errors during execution of tutorial case with own mesh

sergey · May 18, 2007, 03:15

Hi,

I start to learn OpenFOAM and try to make my own mesh inside tutorial cases. I would very thankful if somebody can describe how to deal with errors that I have in log file for sonicLiquidFoam / decompressionTank case.
I use the same files as in case in system and 0 directories as well as thermodynamicProperties transportProperties files.
Files "cells", "faces", "points" and "boundary" in constant/polyMesh directory were generated by me without using blockMeshDict.

Log file contains the following info:

"Case : decompressionTank1
Nprocs : 1
Create time
Create mesh for time = 0
Reading thermodynamicProperties
Reading transportProperties
Reading field p
Reading field U
Reading/calculating face flux field phi

#0 Foam::error::printStack(Foam:: Ostream&)
#1 Foam::sigSegv::sigSegvHandler(int)
#2 Uninterpreted: [0xffffe420]
#3 __libc_free
#4 operator delete(void*)
#5 operator delete[](void*)
#6 Foam::primitiveMesh::makeCellCentresAndVols(Foam:: Field<foam::vector<double> > const&, Foam::Field<foam::vector<double> > const&, Foam::Field<foam::vector<double> >&, Foam::Field<double>&) const
#7 Foam::primitiveMesh::calcCellCentresAndVols() const
#8 Foam::primitiveMesh::cellCentres() const
#9 Foam::fvMesh::makeC() const
#10 Foam::fvMesh::C() const
#11 Foam::surfaceInterpolation::makeWeights() const
#12 Foam::surfaceInterpolation::weights() const
#13 Foam::tmp<foam::geometricfield<foam::vector<double >, Foam::fvPatchField, Foam::surfaceMesh> > Foam::linearInterpolate<foam::vector<double> >(Foam::GeometricField<foam::vector<double>, Foam::fvPatchField, Foam::volMesh> const&)
#14 Foam::tmp<foam::geometricfield<foam::vector<double >, Foam::fvPatchField, Foam::surfaceMesh> > Foam::linearInterpolate<foam::vector<double> >(Foam::tmp<foam::geometricfield<foam::vector<doub le>, Foam::fvPatchField, Foam::volMesh> > const&)
#15 main
#16 __libc_start_main
#17 __gxx_personality_v0 at ../sysdeps/i386/elf/start.S:122"

It seems that mesh is OK since neighbour.gz owner.gz were formed and fields and properties were read successfully.

Thanks,
Sergey.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tutorial case lesCavitatingFoam	achuneka	OpenFOAM Bugs	1	September 25, 2008 13:49
Errors in running a icoFsiFoam case	jin_xu	OpenFOAM Pre-Processing	0	June 9, 2008 06:48
case and dat file of FLUENT tutorial	Sajad Ranjbaran	FLUENT	0	November 8, 2006 06:55
Case in Fluent Tutorial 1	Lam	FLUENT	0	August 24, 2004 11:25
XiFoam tutorial case	pratap	OpenFOAM Running, Solving & CFD	1	March 1, 2004 05:25

May 18, 2007, 03:15	Hi, I start to learn OpenFO	#1
sergey New Member Kuul Sergey Join Date: Mar 2009 Posts: 2 Rep Power: 0	Hi, I start to learn OpenFOAM and try to make my own mesh inside tutorial cases. I would very thankful if somebody can describe how to deal with errors that I have in log file for sonicLiquidFoam / decompressionTank case. I use the same files as in case in system and 0 directories as well as thermodynamicProperties transportProperties files. Files "cells", "faces", "points" and "boundary" in constant/polyMesh directory were generated by me without using blockMeshDict. Log file contains the following info: "Case : decompressionTank1 Nprocs : 1 Create time Create mesh for time = 0 Reading thermodynamicProperties Reading transportProperties Reading field p Reading field U Reading/calculating face flux field phi #0 Foam::error::printStack(Foam:: Ostream&) #1 Foam::sigSegv::sigSegvHandler(int) #2 Uninterpreted: [0xffffe420] #3 __libc_free #4 operator delete(void) #5 operator delete[](void) #6 Foam::primitiveMesh::makeCellCentresAndVols(Foam:: Field<foam::vector<double> > const&, Foam::Field<foam::vector<double> > const&, Foam::Field<foam::vector<double> >&, Foam::Field<double>&) const #7 Foam::primitiveMesh::calcCellCentresAndVols() const #8 Foam::primitiveMesh::cellCentres() const #9 Foam::fvMesh::makeC() const #10 Foam::fvMesh::C() const #11 Foam::surfaceInterpolation::makeWeights() const #12 Foam::surfaceInterpolation::weights() const #13 Foam::tmp<foam::geometricfield<foam::vector<double >, Foam::fvPatchField, Foam::surfaceMesh> > Foam::linearInterpolate<foam::vector<double> >(Foam::GeometricField<foam::vector<double>, Foam::fvPatchField, Foam::volMesh> const&) #14 Foam::tmp<foam::geometricfield<foam::vector<double >, Foam::fvPatchField, Foam::surfaceMesh> > Foam::linearInterpolate<foam::vector<double> >(Foam::tmp<foam::geometricfield<foam::vector<doub le>, Foam::fvPatchField, Foam::volMesh> > const&) #15 main #16 __libc_start_main #17 __gxx_personality_v0 at ../sysdeps/i386/elf/start.S:122" It seems that mesh is OK since neighbour.gz owner.gz were formed and fields and properties were read successfully. Thanks, Sergey.