|
[Sponsors] |
Transient inflow boundary condition for compressible flow |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 13, 2007, 02:42 |
Hi,
Just a dumb question, r
|
#1 |
New Member
Jason Hoogland
Join Date: Mar 2009
Location: Brisbane, QLD, Australia
Posts: 20
Rep Power: 17 |
Hi,
Just a dumb question, rapidly coming up to speed on openfoam but this might help. For icoFoam you can use timeVaryingUniformFixedValue as in: http://www.cfd-online.com/OpenFOAM_D...tml?1164715076 with this format for the data file: ( t0 p0 t1 p1 t2 p2 .... tN pN ) What if you want to specify more than just p? e.g. say u? And could you make the inflow normal to surface using existing code? Jason |
|
April 16, 2007, 18:34 |
Oki doki,
So the timeVaryin
|
#2 |
New Member
Jason Hoogland
Join Date: Mar 2009
Location: Brisbane, QLD, Australia
Posts: 20
Rep Power: 17 |
Oki doki,
So the timeVaryingUniformFixedValue (and timeVaryingMappedValue in 1.4) are used just the same as other bc's. Each field parameter has its own data file in the format above. Jason |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Arbitrary inflow boundary condition | Munikrishna Nagaram | Main CFD Forum | 0 | February 23, 2009 11:03 |
Compressible flow boundary condition | Lokanath | FLUENT | 1 | May 13, 2008 04:01 |
Inflow Boundary Condition | oevermann | OpenFOAM Running, Solving & CFD | 0 | July 27, 2006 02:56 |
curved inflow boundary condition | Rachna | Main CFD Forum | 0 | June 16, 2006 14:31 |
axial flow pump, inflow boundary | tma | CFX | 3 | September 26, 2002 15:28 |