Hi,
I would like to know wh
Hi,
I would like to know which solver to use with the following case : imagine the sample case of icoFoam, with which you impose a temperature at the top wall and a second different temperature at the bottom. Many thanks in advance. Frederic 
Thanks a lot. I will have a lo
Thanks a lot. I will have a look to that case, and the example within those cases.
Regards, Frédéric 
I guess you can always add a t
I guess you can always add a thermal energy equation to icoFoam and call icoThermalFoam or something. That would be a nice addition.

I am guessing you are trying t
I am guessing you are trying to solve the RBconvection kind of problems. If yes, I do have a code that solves the problem. Can pass it on iff you desire.
Badri 
Hi Badri,
You offering a pi
Hi Badri,
You offering a piece of code for RBconvection kind of problems. I would be very interstest in this piece. Jens 
Hi Badri,
I read your post
Hi Badri,
I read your post few days ago. Since I am a new user, could you send me the files fvScheme and fvSolution that correspond to your RB code ? (in the solvers directory, as well as in the working directory) Many thanks in advance. This is to be sure I am doing the right things. Regards, Fred 
Hi Fred,
This is how the fvSc
Hi Fred,
This is how the fvScheme and fvSolution looks like. This is really a rudimentary code though but since you are learning, this is a good start. PS: I think these are the right ones. Badri PASTED CODE ddtSchemes { default Euler; } gradSchemes { default Gauss linear; grad(p) Gauss linear; } divSchemes { default none; div(phi,U) Gauss linear; div(phi,T) Gauss linear; } laplacianSchemes { default none; laplacian(Pr,U) Gauss linear corrected; laplacian(1A(U),p) Gauss linear corrected; laplacian(DT,T) Gauss linear corrected; } interpolationSchemes { default linear; interpolate(HbyA) linear; } snGradSchemes { default corrected; } fluxRequired { default no; p; } fvSolution solvers { p ICCG 1e06 0; U BICCG 1e05 0; T BICCG 1e05 0; } PISO { nCorrectors 2; nNonOrthogonalCorrectors 0; pRefCell 0; pRefValue 0; } 
Hi,
Sorry to be so borring,
Hi,
Sorry to be so borring, but the temperature is not a parameter that I can set up on a boundary. In which file is it to declare ? Thanks in advance, Fred 
All times are GMT 4. The time now is 18:35. 