Wall FUNCTIONS

maritozzo · December 6, 2005, 14:12

I decided to use standard K epsilon model with wall function. When I decide to use wall function i have to set zeroGradient for both K and epsilon as boundary condition, but if I use a wall function which is the value of the velocity U that I have to specify at the walls if they are not a fixed walls in other words not moving walls.
Please Answer

maritozzo · December 6, 2005, 14:14

I made a mistake sorry. THE WALLS ARE NOT MOVING THEY ARE FIXED

guido_adriaensen · December 7, 2005, 02:17

Hello,

Actually that is quite simple, just set:
value uniform (0 0 0)
I.e. no motion of the walls.

Guido

December 6, 2005, 14:12	I decided to use standard K ep	#1
maritozzo Member Muzio Grilli Join Date: Mar 2009 Posts: 36 Rep Power: 17	I decided to use standard K epsilon model with wall function. When I decide to use wall function i have to set zeroGradient for both K and epsilon as boundary condition, but if I use a wall function which is the value of the velocity U that I have to specify at the walls if they are not a fixed walls in other words not moving walls. Please Answer

December 6, 2005, 14:14	I made a mistake sorry. THE WA	#2
maritozzo Member Muzio Grilli Join Date: Mar 2009 Posts: 36 Rep Power: 17	I made a mistake sorry. THE WALLS ARE NOT MOVING THEY ARE FIXED

December 7, 2005, 02:17	Hello, Actually that is qui	#3
guido_adriaensen Member Guido Adriaensen Join Date: Mar 2009 Posts: 56 Rep Power: 17	Hello, Actually that is quite simple, just set: value uniform (0 0 0) I.e. no motion of the walls. Guido

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
wall functions near slanting wall	Pankaj	Main CFD Forum	0	September 11, 2008 09:50
LES with wall functions, wall boundary, Re 10000	subba	CFX	4	July 10, 2007 05:04
Wall Functions	adam	OpenFOAM Running, Solving & CFD	2	August 31, 2006 09:18
damping functions(wall functions)	Pr	Main CFD Forum	0	March 22, 2004 02:17
abt near wall turbulence wall functions	amv	Main CFD Forum	0	May 12, 2003 03:38