hello, I would like to add a
 

hello,
I would like to add another one phase dispersed (solid) in the case of bubbleFoam i.e. a multiphase flow. Will know that I already tried to write the various formulations necessary and there remain to me some arguments by the way this subject.

thank's again

hello, I wanted to plot curve
 

hello,
I wanted to plot curves in 2d of some results, I tested with the instruction given by the OpenFoam documentation, but I do not have to succeed. if somebody has so there already plotted curves starting from OpenFoam.
greeting

If this is using the 'sample'
 

If this is using the 'sample' utility: usually the problem is that

- the end points of the sampling line are not inside a cell.
- the sampling line goes along faces or edges. Just shift one of the endpoints with a very small amount.

Try the sampleDict in the stressedFoam/plateHole.