|
[Sponsors] |
March 26, 2009, 07:49 |
information about moving mesh in openfoam
|
#1 |
New Member
andrianomena
Join Date: Mar 2009
Location: madagascar
Posts: 23
Rep Power: 17 |
Hi there,
I'm quite new to OpenFoam and I was wondering if somebody can give me more information about how to use moving mesh my topic is about modelling a chemical reaction and the mesh is supposed to move Regards, |
|
March 26, 2009, 10:29 |
|
#2 |
Senior Member
Hrvoje Jasak
Join Date: Mar 2009
Location: London, England
Posts: 1,907
Rep Power: 33 |
Have a
look at the paper: http://powerlab.fsb.hr/ped/kturbo/OpenFOAM/papers/meshMotionFAMENA.pdf or some of the slides in http://powerlab.fsb.hr/ped/kturbo/OpenFOAM/slides/ I am not sure if you need mesh motion only or topological changes as well, but this will give you a starting point. Enjoy, Hrv
__________________
Hrvoje Jasak Providing commercial FOAM/OpenFOAM and CFD Consulting: http://wikki.co.uk |
|
March 26, 2009, 12:16 |
thank you
|
#3 |
New Member
andrianomena
Join Date: Mar 2009
Location: madagascar
Posts: 23
Rep Power: 17 |
Hi,
Thank for giving me this information, I will take a look at it Talk to you later, Regads, |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Moving mesh part 2 | lr103476 | OpenFOAM Running, Solving & CFD | 49 | December 14, 2010 07:20 |
moving mesh in parallel mode | Karteek | Siemens | 4 | June 16, 2008 05:12 |
CavitatingFoam with a moving mesh mass conservation error | idosil | OpenFOAM Running, Solving & CFD | 3 | November 27, 2007 18:27 |
LES with moving mesh solver | gtg627e | OpenFOAM Running, Solving & CFD | 2 | July 23, 2007 11:40 |
Moving Mesh PROBLEM | Arnab | Siemens | 10 | October 30, 2004 03:10 |