CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

Problem with modified dieselEngineFoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 14, 2009, 14:16
Default Problem with modified dieselEngineFoam
  #1
New Member
 
Benjamin Berger
Join Date: Mar 2009
Location: Gembloux, Namur, Belgique
Posts: 13
Rep Power: 17
gizmo is on a distinguished road
Hello,

I'm running a modified version of dieselEngineFoam where layering is implemented. I'm running it on a 2D axi-symmetric mesh made with the blockMesh tool.

When I'm running it with a grid of 60(large)x90(height) cells, all work fine. When I try to increase the number of cells over 90, I have this error message after a few steps:

Courant Number mean: 0.0051238 max: 0.179441
Crank angle = -174 CA-deg
deltaZ = 1.84629e-05 Piston at:0.0114478
pistonLayerID: 0
Piston layering mode


Cell 2220 is marked as removed but still has faces. Cell faces:
2
(
4(4514 4515 4576 4575)
4(4636 4637 4698 4697)
)


From function Foam::autoPtr<Foam::mapPolyMesh> Foam:olyTopoChanger::changeMesh
(
polyMesh& mesh,
const polyTopoChange& ref
)
in file polyTopoChange/polyTopoChanger/polyTopoChangerChangeMesh.C at line 620.

FOAM aborting

Aborted

I don't understand where it comes from, does one of you have any suggestion ?

Thank you for your help !
gizmo is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
UDF compiling problem Wouter Fluent UDF and Scheme Programming 6 June 6, 2012 05:43
Incoherent problem table in hollow-fiber spinning Gianni FLUENT 0 April 5, 2008 11:33
natural convection problem for a CHT problem Se-Hee CFX 2 June 10, 2007 07:29
Adiabatic and Rotating wall (Convection problem) ParodDav CFX 5 April 29, 2007 20:13
convergence problem Trushar Phoenics 5 August 28, 2002 00:40


All times are GMT -4. The time now is 01:22.