 |
 |
 |
|
|
|
[Sponsors] | ||||
atmosphere bc in dam brake case (interFoam solver) |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 30, 2009, 06:35
|
atmosphere bc in dam brake case (interFoam solver)
|
#1 |
|
New Member
Join Date: Jul 2009
Posts: 1
Rep Power: 0  |
Dear Users,
for the simulation of a falling liquid film I would like to use an atmosphere boundary condition similar to the one used in the dam break example presented in the User's Guide. For the pressure field the totalPressure and for the velocity field the pressureInletOutletVelocity boundary condition is used. Is there any documentation explaining how these boundary conditions work in detail? Especially the determination of U and pd at inlet is not clear to me. Thanks, Mike H. |
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Working directory via command line | Luiz | CFX | 4 | March 6, 2011 20:02 |
| Changing the grid on the same set-up | Katya | FLUENT | 7 | October 8, 2009 16:31 |
| why the solver reject it? Anyone with experience? | bearcat | CFX | 6 | April 28, 2008 14:08 |
| compressible two phase flow in CFX4.4 | youngan | CFX | 0 | July 1, 2003 23:32 |
| Setting a B.C using UserFortran in 4.3 | tokai | CFX | 10 | July 17, 2001 16:25 |
Linear Mode
