|
[Sponsors] |
January 19, 2010, 12:19 |
time step continuity errors
|
#1 |
Member
Robin Gilbert
Join Date: Jan 2010
Posts: 66
Rep Power: 16 |
Hello guys,
I have the following error when I run the simulation. I cannot understand what it means!!! I am new to Foam, CFD as well as C++. Please help!! diagonal: Solving for rho, Initial residual = 0, Final residual = 0, No Iterations 0 DILUPBiCG: Solving for Ux, Initial residual = 0, Final residual = 0, No Iterations 0 DILUPBiCG: Solving for Uy, Initial residual = 1, Final residual = 6.95187e-06, No Iterations 6 DILUPBiCG: Solving for Uz, Initial residual = 0, Final residual = 0, No Iterations 0 DILUPBiCG: Solving for h, Initial residual = 1, Final residual = 1.47528e-06, No Iterations 8 DICPCG: Solving for p, Initial residual = 1, Final residual = 0.0827294, No Iterations 17 diagonal: Solving for rho, Initial residual = 0, Final residual = 0, No Iterations 0 time step continuity errors : sum local = 0.0115917, global = 0.000265254, cumulative = 0.000265254 DICPCG: Solving for p, Initial residual = 0.571673, Final residual = 6.48667e-07, No Iterations 68 diagonal: Solving for rho, Initial residual = 0, Final residual = 0, No Iterations 0 time step continuity errors : sum local = 1.41866e-07, global = -6.07745e-13, cumulative = 0.000265254 PS: My checkMesh shows no errors too. the meshing seems ok!! |
|
January 19, 2010, 13:05 |
|
#2 |
Member
Robin Gilbert
Join Date: Jan 2010
Posts: 66
Rep Power: 16 |
never mind.... i figured it out. there were some mistakes in the boundary conditions i specified.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ForcesCoeffs | ronaldo | OpenFOAM | 4 | September 14, 2009 07:11 |
time step continuity errors?? | CFT | OpenFOAM Running, Solving & CFD | 2 | June 26, 2009 09:29 |
Unknown error | sivakumar | OpenFOAM Pre-Processing | 9 | September 9, 2008 12:53 |
IcoFoam parallel woes | msrinath80 | OpenFOAM Running, Solving & CFD | 9 | July 22, 2007 02:58 |
Could anybody help me see this error and give help | liugx212 | OpenFOAM Running, Solving & CFD | 3 | January 4, 2006 18:07 |