CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

Setup of compressible turbulent case

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 18, 2010, 07:45
Default Setup of compressible turbulent case
  #1
New Member
 
Markus
Join Date: Sep 2009
Posts: 11
Rep Power: 16
navier-stokes is on a distinguished road
Hello Foamers!
I'm currently trying to set up a new case. Except for the geometry which is imported from Fluent (using fluent3dMeshToFoam) I started from scratch.
The solution should be compressible and turbulent; therefore I decided to use rhoPisoFoam. But I'm not sure whether this is the best choice. In Fluent the case runs stable with a constant time step size of 2.5e-4 but letting rhopisoFoam adjust the time steps the step size falls below 5e-6. On the other hand rhoPisoFoam exits with "max. No. of iterations exceeded" when fixing time step size.
Can anyone give me some hints, please!

Regards

Navier

PS: This archive contains my case.
__________________
kind regards

Navier

<°))))><
navier-stokes is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Compressible turbulent flow FVS Main CFD Forum 1 June 14, 2017 12:45
Comparison of axisymmetric case, Starccm+ and OpenFOAM linnemann OpenFOAM Running, Solving & CFD 12 June 16, 2011 06:43
viscosity setting in compressible case csertoi_aurel FLUENT 2 April 13, 2005 14:44
give me some advice about compressible LES. Bin Li Main CFD Forum 3 September 19, 2003 14:01
Flotran problems with compressible turbulent flows Ross Main CFD Forum 1 September 27, 2002 14:08


All times are GMT -4. The time now is 19:23.